Smeg LS19-7 instruction manual User instructions, Setting The Washing Program, Not present

Page 11
SETTING THE WASHING PROGRAM

User instructions

SETTING THE WASHING PROGRAM

To select the most suitable washing program, refer to the table below which indicates the recommended washing according to dish type and the degree of soiling. Once the most suitable washing program has been selected using the table provided, turn the WASHING PROGRAM SELECTOR (1) to set the program required, placing it against the identification symbol or nummer.

PROGRAM

SOAK

DISH WARMER

QUICK

LIGHT

ECO

BIO

(*)EN 50242

AUTO 40-50

AUTO 60-70

STRONG and FAST

SUPER

INFORMATION PROGRAM

DISPLAY SELECTOR

P1

P2

P3

P4

P5

P6

P7

P8

P9

P10

DISHES TYPE

AND DEGREE OF SOILING

DISHES, POTS AND PANS

AWAITING COMPLETION OF THE LOAD

DISHES REQUIRING RINSING AND

WARMING BEFORE TAKING TO TABLE

SLIGHTLY SOILED DELICATE DISHES

WASH IMMEDIATELY AFTER USE

FOR DISHES WITH LIGHT DIRT

NORMALLY SOILED DISHES,

POTS AND PANS WITH DRIED-ON RESIDUE

SLIGHTLY SOILED DISHES,

POTS AND PANS WITH DRIED-ON RESIDUE

DISHES WASHED IMMEDIATELY AFTER USE

NORMALLY SOILED DISHES,

INCLUDING DRIED-ON RESIDUE

DISHES WITH NORMAL DIRT

WHICH HAS NOT DRIED

HEAVILY SOILED DISHES,

POTS AND PANS WITH DRIED-ON RESIDUE

QUANTITY

DETERGENT

GRAMS

_

_

25

25

30

30

30

30

30

10 - 25

Only run the soak program with half loads.

The HALF LOAD (5) and "3/1" (6) options cannot be used with the soak program.

(*)Reference program as EN 50242 standard.

(-)

Not present.

10

Image 11
Contents Page Contents 1. Safety and operating instructions Safety instructionsTHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsAQUASTOP MODELS Safety instructionsFor free-standingmodels only Installation instructions2. Installation and hook-up DRAIN CONNECTION Installation instructionsCONNECTING TO THE WATER SUPPLY 2.1 Water supply connectionL = brown N = blue = yellow-green Installation instructions2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Installation instructionsFuse replacement 3.1 Front panel User instructions3. Description of the controls SWITCHING ONNot present SETTING THE WASHING PROGRAMUser instructions User instructions Before starting a washing program make sure that CANCELLING THE CURRENT PROGRAMUser instructions 3.3 Washing programsUser instructions DELAYING THE PROGRAM available in all programs except the soak program User instructionsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT User instructionsREMOVING THE DISHES User instructionsSTARTING THE DISHWASHER END OF CYCLEUser instructions 4. Operating instructions4.1Using the water softening system Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system User instructionsWATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersUser instructions ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions ADDING THE DETERGENT User instructions3/1 Products User instructions4.3 General warnings and recommendations Silverware silver items may stain User instructionsLOWER BASKET 4.4 Using the basketsUser instructions Loading examples ½ LOAD User instructionsLOADING THE LOWER BASKET to extract the inserts User instructionsCUTLERY BASKET Movement requiredLOADING THE UPPER BASKET User instructionsUPPER BASKET User instructions Depending on the models, the basket may be equipped with some or all of the following accessoriesVersion B ADJUSTING THE UPPER BASKETUser instructions User instructions User instructions 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser CLEANING THE FILTER UNITUser instructions PROLONGED DISUSEIf the program fails to start, check that TROUBLESHOOTING MINOR PROBLEMSUser instructions there is rinse aid inside the special container User instructionsE1 E2 E3 6. TroubleshootingFAULT User instructionsDESCRIPTION The dishwasher fails to draw water FAULTUser instructions E5 E6einstellen mollelaterali primadell’installazionedes ressortslateraux avant l’installation Montare la porta e regolarelatensione delle