Smeg LS19-7 instruction manual Contents

Page 2
Contents

Contents

1.Safety and operating instructions ___________________________ 2

2.Installation and hook-up___________________________________ 5

3.Description of the controls _________________________________ 9

4.Operating instructions ___________________________________ 17

5.Cleaning and maintenance _______________________________ 31

6.Troubleshooting ________________________________________ 35

Thank you for choosing one of our products.

You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher.

The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the texts are easy to understand and are complete with detailed illustrations.

Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls.

Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term.

This user-friendly manual will provide answers to all your questions about use of the dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.

1

Image 2
Contents Page Contents Safety instructions 1. Safety and operating instructionsSafety instructions THIS DISHWASHER MUST BE USED BY ADULTSSafety instructions AQUASTOP MODELSFor free-standingmodels only Installation instructions2. Installation and hook-up 2.1 Water supply connection Installation instructionsCONNECTING TO THE WATER SUPPLY DRAIN CONNECTIONL = brown N = blue = yellow-green Installation instructions2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Installation instructionsFuse replacement SWITCHING ON User instructions3. Description of the controls 3.1 Front panelNot present SETTING THE WASHING PROGRAMUser instructions User instructions 3.3 Washing programs CANCELLING THE CURRENT PROGRAMUser instructions Before starting a washing program make sure thatUser instructions User instructions DELAYING THE PROGRAM available in all programs except the soak programUser instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTEND OF CYCLE User instructionsSTARTING THE DISHWASHER REMOVING THE DISHESUser instructions 4. Operating instructions4.1Using the water softening system User instructions Do not use table salt as it contains insoluble substances which, over time, may damage the water softening systemWATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersUser instructions ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions User instructions ADDING THE DETERGENT3/1 Products User instructions4.3 General warnings and recommendations User instructions Silverware silver items may stainLOWER BASKET 4.4 Using the basketsUser instructions Loading examples ½ LOAD User instructionsLOADING THE LOWER BASKET Movement required User instructionsCUTLERY BASKET to extract the insertsLOADING THE UPPER BASKET User instructionsUPPER BASKET Depending on the models, the basket may be equipped with some or all of the following accessories User instructionsVersion B ADJUSTING THE UPPER BASKETUser instructions User instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER User instructionsPROLONGED DISUSE CLEANING THE FILTER UNITUser instructions Fill the rinse aid dispenserIf the program fails to start, check that TROUBLESHOOTING MINOR PROBLEMSUser instructions User instructions there is rinse aid inside the special containerUser instructions 6. TroubleshootingFAULT E1 E2 E3E5 E6 FAULTUser instructions DESCRIPTION The dishwasher fails to draw waterMontare la porta e regolarelatensione delle mollelaterali primadell’installazionedes ressortslateraux avant l’installation einstellen