Smeg LS19-7 instruction manual Installation instructions, For Great Britain Only, Fuse replacement

Page 9

FOR GREAT BRITAIN ONLY:

Installation instructions

FOR GREAT BRITAIN ONLY:

THIS APPLIANCE MUST BE EARTHED.

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1.Remove the fuse cover A and fuse B.

2.Fit replacement 13A fuse into fuse cover.

3.Refit both into plug.

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical store.

8

Image 9

Contents Page Contents 1. Safety and operating instructions Safety instructionsTHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsAQUASTOP MODELS Safety instructionsInstallation instructions 2. Installation and hook-upFor free-standingmodels only CONNECTING TO THE WATER SUPPLY Installation instructions2.1 Water supply connection DRAIN CONNECTIONInstallation instructions 2.2 Electrical connection and precautionsL = brown N = blue = yellow-green Installation instructions Fuse replacementFOR GREAT BRITAIN ONLY 3. Description of the controls User instructionsSWITCHING ON 3.1 Front panelSETTING THE WASHING PROGRAM User instructionsNot present User instructions User instructions CANCELLING THE CURRENT PROGRAM3.3 Washing programs Before starting a washing program make sure thatUser instructions DELAYING THE PROGRAM available in all programs except the soak program User instructionsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT User instructionsSTARTING THE DISHWASHER User instructionsEND OF CYCLE REMOVING THE DISHES4. Operating instructions 4.1Using the water softening systemUser instructions Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system User instructions4.2 Using the rinse aid and detergent dispensers User instructionsWATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING User instructionsADDING THE RINSE AID ADDING THE DETERGENT User instructionsUser instructions 4.3 General warnings and recommendations3/1 Products Silverware silver items may stain User instructions4.4 Using the baskets User instructionsLOWER BASKET User instructions LOADING THE LOWER BASKETLoading examples ½ LOAD CUTLERY BASKET User instructionsMovement required to extract the insertsUser instructions UPPER BASKETLOADING THE UPPER BASKET User instructions Depending on the models, the basket may be equipped with some or all of the following accessoriesADJUSTING THE UPPER BASKET User instructionsVersion B User instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS User instructionsUser instructions CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenserTROUBLESHOOTING MINOR PROBLEMS User instructionsIf the program fails to start, check that there is rinse aid inside the special container User instructionsFAULT 6. TroubleshootingUser instructions E1 E2 E3User instructions FAULTE5 E6 DESCRIPTION The dishwasher fails to draw waterdes ressortslateraux avant l’installation mollelaterali primadell’installazioneMontare la porta e regolarelatensione delle einstellen