User instructions
•Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system.
•When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed by the water; the prolonged presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding detergent to the salt container will damage the water softening system.
ADJUSTING THE WATER SOFTENING SYSTEM (available in all programs except the soak program)
The dishwasher is equipped with an electronic device for adjusting the water softening setting according to the hardness of the water. To adjust the water softening setting, proceed as follows:
•Keep the PROGRAM DELAY button (4) pressed for a few seconds, until H3 appears on the INFORMATION DISPLAY (8).
•The PROGRAM DELAY button (4) can be pressed again to select the most suitable hardness value (H1, H2…H5). Refer to the "Water Hardness Table" to select the value.
•Press any key to exit the programming mode, or wait a few seconds.
18