Smeg LS19-7 User instructions, General warnings and recommendations, 3/1 Products

Page 23
•"3/1" Products

User instructions

"3/1" Products

If you wish to use detergents which already contain salt and rinse aid, check whether your dishwasher is fitted with the "3/1 option button" on the "Controls description" page and then refer to the section which explains how to use this function.

If the button is not provided, we recommend the use of conventional products (separate detergent, salt and rinse aid), because with conventional washing cycles "3/1" products might create problems such as a white deposit, poor drying results and residues left on dishes.

The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher.

4.3 General warnings and recommendations

Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading.

There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.

Before loading the dishes into the baskets it is necessary to:

remove coarse food remains: e.g. bones, fish-bones, etc. which may clog the filter or damage the wash pump.

soak any pots or pans with burnt-on food remains on the bottom to facilitate removal, then load them into the LOWER BASKET.

There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water.

Correct loading of the dishes helps ensure optimal washing results.

22

Image 23
Contents Page Contents 1. Safety and operating instructions Safety instructionsTHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsAQUASTOP MODELS Safety instructionsFor free-standingmodels only Installation instructions2. Installation and hook-up DRAIN CONNECTION Installation instructionsCONNECTING TO THE WATER SUPPLY 2.1 Water supply connectionL = brown N = blue = yellow-green Installation instructions2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Installation instructionsFuse replacement 3.1 Front panel User instructions3. Description of the controls SWITCHING ONNot present SETTING THE WASHING PROGRAMUser instructions User instructions Before starting a washing program make sure that CANCELLING THE CURRENT PROGRAMUser instructions 3.3 Washing programsUser instructions DELAYING THE PROGRAM available in all programs except the soak program User instructionsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT User instructionsREMOVING THE DISHES User instructionsSTARTING THE DISHWASHER END OF CYCLEUser instructions 4. Operating instructions4.1Using the water softening system Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system User instructionsWATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersUser instructions ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions ADDING THE DETERGENT User instructions3/1 Products User instructions4.3 General warnings and recommendations Silverware silver items may stain User instructionsLOWER BASKET 4.4 Using the basketsUser instructions Loading examples ½ LOAD User instructionsLOADING THE LOWER BASKET to extract the inserts User instructionsCUTLERY BASKET Movement requiredLOADING THE UPPER BASKET User instructionsUPPER BASKET User instructions Depending on the models, the basket may be equipped with some or all of the following accessoriesVersion B ADJUSTING THE UPPER BASKETUser instructions User instructions User instructions 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser CLEANING THE FILTER UNITUser instructions PROLONGED DISUSEIf the program fails to start, check that TROUBLESHOOTING MINOR PROBLEMSUser instructions there is rinse aid inside the special container User instructionsE1 E2 E3 6. TroubleshootingFAULT User instructionsDESCRIPTION The dishwasher fails to draw water FAULTUser instructions E5 E6einstellen mollelaterali primadell’installazionedes ressortslateraux avant l’installation Montare la porta e regolarelatensione delle