Instructions for the Installer
15.ADAPTING TO DIFFERENT TYPES OF GAS
Before carrying out the operations described below, disconnect the appliance from the electricity supply.
The appliance is tested with natural gas G20 (2H) at the pressure of 20 mbar. If it is to be used with other types of gas, the burner nozzles have to be changed and the gas tap adjusted to set the minimum flame. To replace the nozzles, proceed as described below.
15.1 Changing the hob nozzles
7Remove the pan stands, all the burner caps and the flame diffuser rings
8Use a 7 mm socket wrench to unscrew the burner nozzles;
9Replace the burner nozzles depending on the type of gas to be used (see point “15.2 Burner and Nozzle Data Tables”).
10Put the burners back into place correctly.
112