Smeg SCP107AL, SCP108SG Instructions for the User, Modifying the data set, Semiautomatic cooking

Page 10
To switch the oven off completely, turn PT2 to the "0" symbol.

Instructions for the User

Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed.

To switch the oven off completely, turn PT2 to the "0" symbol.

Modifying the data set

Once the countdown has started, its duration can be changed while cooking is in progress.

When the Modifying the data set symbol is steady, press PT1 once. The 7.5.2 Semiautomatic cooking symbol starts flashing and PT1 can be turned to change the set duration. A few seconds

after the last change, the Turn PT2 to the "0" symbol to switch the oven off completely. symbol will stop flashing, and the countdown will restart from the new value.

To change the preset temperature, wait for the Manual background symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

7.5.2 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user.

Select a cooking function (see point “7.4 Selecting the function”) and press

PT1 twice. The display will show the Manual background figures and the Manual background symbol (flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to

23:59). A few seconds after the required duration is set, the Manual background symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously.

Turn PT2 to the "0" symbol to switch the oven off completely.

Modifying the data set

Once semiautomatic cooking has started, its duration can be changed.

When the Manual backgroundsymbol is steady, press PT1 once. The Manual background symbol starts flashing and PT1 can be turned to change the set duration. A few seconds

after the last change, the Manual background symbol will stop flashing, and semiautomatic cooking will restart from the new value.

To change the preset temperature, wait for the Manual background symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

40

Image 10
Contents Table of Contents Precautions for Use 1. PRECAUTIONS FOR USEDisposal instructions 2. DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICYSafety precautions 3. SAFETY PRECAUTIONSInstructions for the User 5. BEFORE INSTALLATION4. GET TO KNOW YOUR OVEN for convenience it will be referred to as PT1 6. DESCRIPTION OF FRONT PANEL CONTROLSTHERMOSTAT-TIMER KNOB DISPLAYFUNCTION-SWITCH ON KNOB From now on, for convenience it will be referred to as PT27.2 Operating modes 7. USING THE OVEN7.1 Precautions and General Advice All cooking operations must be carried out with the door closed7.4 Selecting the function 7.5 Programmed cooking procedures7.3 First use 7.4.1 Cooking with preset temperatureModifying the data set To switch the oven off completely, turn PT2 to the 0 symbolTurn PT2 to the 0 symbol to switch the oven off completely 7.5.2 Semiautomatic cookingTurn PT2 to 0 to switch off the oven 7.5.3 Automatic cooking7.6 Secondary menu SYMBOLS 7.6.1 Modifying the secondary menu settingsMENU MODIFICATION PROCEDURE Turn7.7 Cooling fan system 7.8 Inside light8. ACCESSORIES AVAILABLE Optional accessoriesThe oven must be preheated before all cooking operations 9. RECOMMENDED COOKING TABLESCONVENTIONAL COOKING PASTAHOT AIR COOKING PROVING - DEFROSTINGROTISSERIE COOKING GRILLINGRUNNER POSITION FROM 10.2 Routine daily cleaning 10. CLEANING AND MAINTENANCE10.1 Cleaning stainless steel Never use a jet of steam for cleaning the inside of the oven10.5 Cleaning the door glazing 10.4 Cleaning the ovenRemove all removable parts 90 MIN 10.6 Pyrolysis automatic oven cleaning10.6.1 Before starting the automatic cleaning cycle 135 MIN10.6.2 How the automatic cleaning cycle works 10.6.3 Setting the cleaning cycle 11.1 Changing the light bulb 11. EXTRAORDINARY MAINTENANCEUse only light bulbs approved for ovens T 500C 11.2.1 With type 1 mobile levers 11.2 Removing the door11.3 Removing the gasket 11.4 Removing the inside glass with the door cold type H05V2V2-F 3 x 1.5 mm2 three-wire cable Instructions for the Installer12. INSTALLING THE APPLIANCE 12.1 Electrical connection12.2 Positioning the oven