Smeg SC110NE, SC110EBO, SC110SG manual First use, Selecting the function

Page 9

Instructions for the User

7.3First use

At first use, or after a power failure, the oven's left hand-display, DSP1, will

show a flashing symbol. To start any cooking operation, the current time must be set.

7.3.1 Setting the current time

To set the current time, turn PT1 to the right and left to increase or decrease the hours. Press it once to move on to setting the minutes. Turn it the right and left to increase or decrease the minutes and press it to set

the current time. The symbol will appear on the display, which will stop flashing.

7.3.2 Changing the current time

It might become necessary to change the current time, for example at the switch from summer to winter time. To do this, starting from the standby setting (see point “7.2 Operating modes”) keep PT1 pressed until the figures on DSP1 flash. Now repeat the operations described in point “7.3.1 Setting the current time”.

7.4Selecting the function

In the ON state only, a cooking function can be selected by simply turning PT2 to the right or left. The function selected will change colour to red on DSP3. The preset cooking temperature will be displayed on DSP2.

7.4.1 Cooking with preset temperature

After selection of the function required, the oven will start the cooking procedure at the preset temperature. Cooking itself is preceeded by a preheating stage, which allows the oven to heat to the cooking temperature more quickly. The ° symbol flashes on DSP2 to indicate that

this stage is in progress. The symbols will light up one at a time, from the bottom up, indicating the rise in the temperature inside the oven. When

the preheating stage is over, the ° and symbols will remain constantly on to indicate that the food can be placed inside the oven.

7.4.2 Changing the preset temperature

The temperature preset for each function can be changed to suit the user's requirements.

At any time while cooking is in progress, turn PT1 in either direction to increase or decrease the cooking temperature by 5 degrees at a time. PT1 can also be held in the left or right position to increase or decrease the setting more quickly.

40

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety precautionsInstructions for the User GET to Know Your Oven Before InstallationFor convenience it will be referred to as PT1 Description of Front Panel ControlsFrom now on, for convenience it will be referred to as DSP1 From now on, for convenience it will be referred to as DSP2From now on, for convenience it will be referred to as PT2 FUNCTION-SWITCH on KnobUsing the Oven Precautions and General AdviceOperating modes Selecting the function First useCooking with minute minder Programmed cooking proceduresModifying the data set Semiautomatic cookingTime required to be set Automatic cookingSecondary menu Child safety lock-out functionShow Room Function Power selection functionInside light Cooling fan systemPrecautions for using the pizza plate Using the Pizza Function on Some Models onlyTo save energy Pizza plate on some models only Accessories AvailableConventional Cooking Recommended Cooking TablesGrilling Cleaning stainless steel Cleaning and MaintenanceRoutine daily cleaning Food stains or spillsOn some models only Cleaning the ovenCleaning the oven with self-cleaning liners Using the self-cleaning linersMaintenance of self-cleaning liners Removing the self-cleaning liners Cleaning the door glazingInstructions for the Installer Extraordinary MaintenanceChanging the light bulb Removing the door Removing doors with pinsRemoving the inside glass with the door cold With type 1 mobile leversRemoving the gasket Installing the Appliance Electrical connectionOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer
Top Page Image Contents