Smeg SC110EBO Programmed cooking procedures, Cooking with minute minder, Modifying the data set

Page 10

Instructions for the User

7.5Programmed cooking procedures

7.5.1 Cooking with minute minder

From ON status (see point “7.2 Operating modes”), press PT1 once. The

display will show the figures (constantly on) and the symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A

few seconds after the required duration is set, the symbol will stop flashing, and the countdown will start from that moment. Now select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over.

When cooking is over, to stop the buzzer and halt cooking, press PT2 once to switch the oven to OFF status.

The minute minder also works with no function set.

Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed.

To switch the oven off, press PT2.

Modifying the data set

Once the countdown has started, its duration can be changed while cooking is in progress.

When the symbol is steady and cooking is in progress, press PT1 once. The symbol starts flashing and PT1 can be turned to change the

set duration. A few seconds after the last change, the symbol will stop flashing, and the countdown will restart from the new value.

To change the preset temperature, wait for the symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

7.5.2 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user.

Select a cooking function (see point “7.4 Selecting the function”) and press

PT1 twice. The display will show the figures and the symbol (flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to

23:59). A few seconds after the required duration is set, the symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 to deactivate it.

41

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Table of Contents Precautions for Use Precautions for USEDisposal instructions Disposal Instructions OUR Environment PolicySafety precautions Safety PrecautionsGET to Know Your Oven Before Installation Instructions for the UserFrom now on, for convenience it will be referred to as DSP1 Description of Front Panel ControlsFor convenience it will be referred to as PT1 From now on, for convenience it will be referred to as DSP2FUNCTION-SWITCH on Knob From now on, for convenience it will be referred to as PT2Precautions and General Advice Using the OvenOperating modes First use Selecting the functionModifying the data set Programmed cooking proceduresCooking with minute minder Semiautomatic cookingAutomatic cooking Time required to be setChild safety lock-out function Secondary menuPower selection function Show Room FunctionCooling fan system Inside lightUsing the Pizza Function on Some Models only Precautions for using the pizza plateTo save energy Accessories Available Pizza plate on some models onlyRecommended Cooking Tables Conventional CookingGrilling Routine daily cleaning Cleaning and MaintenanceCleaning stainless steel Food stains or spillsCleaning the oven On some models onlyUsing the self-cleaning liners Cleaning the oven with self-cleaning linersMaintenance of self-cleaning liners Cleaning the door glazing Removing the self-cleaning linersExtraordinary Maintenance Instructions for the InstallerChanging the light bulb Removing the inside glass with the door cold Removing doors with pinsRemoving the door With type 1 mobile leversRemoving the gasket Electrical connection Installing the ApplianceOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer
Top Page Image Contents