| 10 |
|
|
Overlay Panels
If you and your client have ordered an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all
IMPORTANT NOTE: Overlay models can be used in an overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation.
The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three
The illustrations provide a cross section view of the three- panel assembly, showing placement of the trim and a rear view of the
Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the follow- ing pages.
IMPORTANT NOTE: When installing two units in a
Do not exceed overlay panel dimensions, as this could cause damage to panels and the
Regardless of the physical construction of the panels
Overlay Panel Requirements
MAX WEIGHT PER PANEL |
|
All Overlay Models | 23 kg |
Grille Panel | 6 kg |
MIN PANEL THICKNESS |
|
All Overlay Panels | 16 mm |
|
|
SPACER PANEL |
OVERLAY PANEL |
BACKER PANEL |
TRIM |
8 mm min |
3 mm |
OVERLAY | SPACER | ||
PANEL |
| PANEL | |
|
| BACKER | |
|
| PANEL | |
19 |
| 6 | |
mm | 3 | ||
mm | |||
typical | mm |
Panel assembly cross section. Panel assembly rear view.