Sub-Zero ICBBI-36U, ICBBI-42S manual Flush Inset Panel Specifications, ICBWS-30 Flush Inset

Page 61

Wine Storage

61

Model ICBWS-30

FLUSH INSET PANEL

Overlay model ICBWS-30 used in a flush inset application allows the decorative panel to cover the door trim for a seamless appearance. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically 19 mm, a 3 mm spacer panel and a 6 mm backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the flush inset panel is critical, it must fit over the door frame.

IMPORTANT NOTE: Do not cover the glass door with a solid panel. The inside edges of the rough opening as well as the sides and a portion of the back side of the decora- tive panels will need to be finished, as they will be exposed when the doors are open. The window cut-out edges of the overlay, spacer and backer panels will also need to be finished.

IMPORTANT NOTE: For flush inset panels thicker than

19 mm, a 90° door stop may be required to prevent inter- ference with adjacent cabinets.

Flush Inset Panel Requirements

MODEL ICBWS-30
Max Panel Weight	34 kg
Min Panel Thickness	16 mm

subzero.com/specs

FLUSH INSET PANEL SPECIFICATIONS

	H
	A
A	A
	H
	A
	W

ICBWS-30 Flush Inset

DOOR	W	H
Flush Inset Panel	787 mm	1772 mm
Spacer Panel	740 mm	1751 mm
Backer Panel	756 mm	1767 mm
GRILLE	W	H
Flush Inset Panel	787 mm	235 mm
Spacer Panel	740 mm	211 mm
Backer Panel	756 mm	227 mm
WINDOW	W	H
Cut-Out	597 mm	1581 mm
		A
Location		95 mm

Grille panel dimensions listed are for a standard 2134 mm overall height of the unit. For a 2108 mm overall height, subtract 25 mm from grille panel height dimensions. For a 2235 mm overall height, add 102 mm to height dimensions. Width dimensions do not vary.

SPACER PANEL

FLUSH INSET PANEL

BACKER PANEL

TRIM

8 mm min

14

mm

	FLUSH INSET		SPACER
	PANEL		PANEL
			BACKER
			PANEL
	19		6
	mm	3	6
	mm	3	mm
	typical	mm	mm
	typical	mm

Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Panel assembly cross	Panel assembly rear view.
section.

Image 61

Contents

International Design Guide Contents Built-In Refrigeration KEY FeaturesBUILT-IN Models Overall Dimensions SpecificationsBuilt-In Refrigeration Built-In Models All Refrigerator / All Freezer ModelsBuilt-In Refrigeration Over-and-Under Models Model ICBBI-36S Built-In Refrigeration Side-by-Side ModelsModels ICBBI-48S and ICBBI-48SD Opening Width Standard InstallationElectrical Requirements Built-In Refrigeration Planning InformationPlumbing Requirements Electrical RequirementsOverlay Panel Requirements Built-In Refrigeration Overlay PanelsModel ICBBI-36U Model ICBBI-30UModel ICBBI-42S Model ICBBI-36SModels ICBBI-48S and ICBBI-48SD Built-In Refrigeration Flush Inset Application Flush Inset Opening Widths Flush Inset InstallationFlush Inset Panel Requirements Built-In Refrigeration Flush Inset PanelsPanel Offsets Illus Panel OffsetsICBBI-30U / ICBBI-36U Dispenser ICBBI-48SD Model ICBBI-48SD Built-In Refrigeration DispenserBuilt-In Refrigeration Side Panels Dual Installation Panel Requirements Built-In Refrigeration Dual InstallationStandard Application Opening Widths Flush Inset Application 665 mm Flush Inset Panel Offsets ICBBI-30U Built-In Refrigeration Dual Installation-Flush Inset PanelsInstallation with Dual Wide Grille Built-In Refrigeration Dual Installation KitInstallation with Individual Grilles Dual Wide Grille-OverlayStandard Handles Built-In Refrigeration AccessoriesStandard Handles Length Stud Spacing FULL-SCALE Template Built-In Refrigeration Overlay Panel ThicknessBuilt-In Refrigeration Overlay Application 610 mm Dual Installation-Standard Dual Installation-Flush Inset PRO 48 Models PRO 48 RefrigerationPRO 48 Refrigeration PRO 48 Models Capacity / WeightOpening Dimensions Standard Flush Standard and Flush BUILT-IN InstallationsPRO 48 Refrigeration Planning Information PRO 48 Refrigeration Accessories Integrated Models Integrated RefrigerationMm Tall Models Integrated Refrigeration Overall DimensionsDrawer Models Capacity and WeightOpening Dimensions Integrated Refrigeration Opening DimensionsIntegrated Refrigeration Electrical Requirements Integrated Refrigeration Plumbing Requirements Integrated Refrigeration Cabinetry Applications Typical Panel DimensionsFrameless Cabinetry TOE Kick Clearance Door Panel HeightPanel Requirements Mm is possible with adjustments to panel dimensions Dual InstallationsIntegrated Refrigeration Accessories Opening Maximum Door OpeningWine Storage Models Wine StorageUndercounter Wine Storage Wine Storage Overall DimensionsFULL-SIZE Wine Storage Model ICBWS-30 Storage Capacity Bottles 750 mlModels ICB427G and ICB427RG Wine Storage Opening Dimensions2127 mm 746 mm Wine Storage Planning Information Dual InstallationsModel ICB424G Wine Storage Door PanelsFreestanding Model ICB424FSG Overlay PanelsModels ICB427G and ICB427RG Wine Storage Integrated PanelsIntegrated Panels Wine Storage Model ICBWS-30 Overlay Panel SpecificationsOverlay Panel ICBWS-30 OverlayFlush Inset Panel Flush Inset Panel SpecificationsICBWS-30 Flush Inset 13 mm Dual Standard InstallationsDual Flush Inset Panel Specifications Dual Flush Inset InstallationsICBWS-30 Dual Flush Inset Damage to the panels and the Sub-Zero unit Dual Flush Inset PanelsHandle Hardware Wine Storage Side PanelsModel ICBWS-30 Dimension Wine Storage AccessoriesDoor Frame Profile Wine Storage Wine Shelf Wood Facing Wine Storage Door Clearance SUB-ZERO, INC

Related manuals

Manual 78 pages 23.73 Kb