Integrated Refrigeration | 48 |
|
|
Cabinetry Applications
The illustrations below show typical applications of framed and frameless cabinetry. Refer to the
Dual Installations
Two integrated units may be placed side by side in a dual installation. Depending on the models specified, opening widths will be 1372 mm, 1600 mm or 1829 mm. Panel width dimensions will vary slightly from single installations. Refer to the chart below for typical panel dimensions. The dimensions are based on a 3 mm reveal. A reveal of up to
CABINET | INTEGRATED |
| UNIT |
DOOR | PANEL |
3 mm |
|
REVEAL | FINISHED |
| OPENING |
CABINET | INTEGRATED |
| UNIT |
DOOR | PANEL |
3 mm |
|
REVEAL | FINISHED |
| OPENING |
6 mm is possible with adjustments to panel dimensions.
Typical Panel Dimensions
686 mm MODELS | W | H |
Door | 681 mm | 1153 mm |
Top Drawer | 681 mm | 345 mm |
Bottom Drawer | 681 mm | 424 mm |
914 mm MODELS | W | H |
Door | 910 mm | 1153 mm |
Top Drawer | 910 mm | 345 mm |
Bottom Drawer | 910 mm | 424 mm |
|
|
|
|
|
CABINET | UNIT |
DOOR |
|
| PANEL |
| 3 mm |
| REVEAL |
| FINISHED |
| OPENING |
CABINET | INTEGRATED |
| UNIT |
DOOR | PANEL |
3 mm |
|
REVEAL | FINISHED |
| OPENING |
A dual installation kit is required for installations with 51
mmor less space between the units. Dual installation kits are available through your authorized
IMPORTANT NOTE: If a 686 mm unit is installed next to a 914 mm tall unit, the decorative front panels will align, however, the face frames will not. This is only apparent when both doors are open at the same time. Due to a more robust hinge on 914 mm units, the face frame was reconfigured to maintain a consistent overall panel height. Refer to the illustration below.
Frameless cabinetry. |
Face frame alignment.