Sub-Zero ICBBI-36F Built-In Refrigeration Flush Inset Panels, Flush Inset Panel Requirements

Page 15

Built-In Refrigeration

15

Flush Inset Panels

The flush inset application allows decorative panels on the front of the unit to be flush with surrounding cabinetry and is available for all built-in overlay models. For exact panel dimensions, refer to flush inset panel specifications on the following pages.

The flush inset design allows decorative panels to cover the door trim for a seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically 19 mm, a 3 mm spacer panel and a 6 mm backer panel. Depending on your cabinet manufacturer, this could also be one panel routed for different dimensions.

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the flush inset panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Flush Inset Panel Requirements

MAX WEIGHT PER PANEL

 

All Flush Inset Models

23 kg

Grille Panel

6 kg

MIN PANEL THICKNESS

 

All Flush Inset Panels

16 mm

 

 

subzero.com/specs

The illustration below provides a rear view of the three- panel assembly with critical dimensions, standard for all built-in models.

IMPORTANT NOTE: The inside edges of the rough opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open.

IMPORTANT NOTE: For flush inset panels thicker than

19 mm, a 90° door stop may be required to prevent inter- ference with adjacent cabinets. Refer to the full-scale tem- plates at the end of this section.

IMPORTANT NOTE: When installing two units side by side in a flush inset application, refer to pages 23–27 for dual flush inset installations. Be aware that rough opening dimensions, panel sizes and offsets are different for this application.

FLUSH INSET

SPACER

PANEL

PANEL

 

 

BACKER

 

 

PANEL

19

 

6

mm

3

mm

typical

mm

 

Three-panel assembly.

Image 15
Contents International Design Guide Contents KEY Features Built-In RefrigerationBUILT-IN Models All Refrigerator / All Freezer Models SpecificationsOverall Dimensions Built-In Refrigeration Built-In ModelsBuilt-In Refrigeration Over-and-Under Models Model ICBBI-36S Built-In Refrigeration Side-by-Side ModelsModels ICBBI-48S and ICBBI-48SD Opening Width Standard InstallationElectrical Requirements Built-In Refrigeration Planning InformationElectrical Requirements Plumbing RequirementsOverlay Panel Requirements Built-In Refrigeration Overlay PanelsModel ICBBI-36U Model ICBBI-30UModel ICBBI-36S Model ICBBI-42SModels ICBBI-48S and ICBBI-48SD Built-In Refrigeration Flush Inset Application Flush Inset Opening Widths Flush Inset InstallationFlush Inset Panel Requirements Built-In Refrigeration Flush Inset PanelsPanel Offsets Illus Panel OffsetsICBBI-30U / ICBBI-36U Dispenser ICBBI-48SD Model ICBBI-48SD Built-In Refrigeration DispenserBuilt-In Refrigeration Side Panels Built-In Refrigeration Dual Installation Dual Installation Panel RequirementsStandard Application Opening Widths Flush Inset Application 665 mm Flush Inset Panel Offsets ICBBI-30U Built-In Refrigeration Dual Installation-Flush Inset PanelsDual Wide Grille-Overlay Built-In Refrigeration Dual Installation KitInstallation with Dual Wide Grille Installation with Individual GrillesBuilt-In Refrigeration Accessories Standard HandlesStandard Handles Length Stud Spacing FULL-SCALE Template Built-In Refrigeration Overlay Panel ThicknessBuilt-In Refrigeration Overlay Application 610 mm Dual Installation-Standard Dual Installation-Flush Inset PRO 48 Models PRO 48 RefrigerationPRO 48 Refrigeration PRO 48 Models Capacity / WeightOpening Dimensions Standard Flush Standard and Flush BUILT-IN InstallationsPRO 48 Refrigeration Planning Information PRO 48 Refrigeration Accessories Integrated Models Integrated RefrigerationMm Tall Models Integrated Refrigeration Overall DimensionsDrawer Models Capacity and WeightOpening Dimensions Integrated Refrigeration Opening DimensionsIntegrated Refrigeration Electrical Requirements Integrated Refrigeration Plumbing Requirements Typical Panel Dimensions Integrated Refrigeration Cabinetry ApplicationsFrameless Cabinetry TOE Kick Clearance Door Panel HeightPanel Requirements Mm is possible with adjustments to panel dimensions Dual InstallationsIntegrated Refrigeration Accessories Opening Maximum Door OpeningWine Storage Models Wine StorageUndercounter Wine Storage Wine Storage Overall DimensionsFULL-SIZE Wine Storage Model ICBWS-30 Storage Capacity Bottles 750 mlModels ICB427G and ICB427RG Wine Storage Opening Dimensions2127 mm 746 mm Wine Storage Planning Information Dual InstallationsOverlay Panels Wine Storage Door PanelsModel ICB424G Freestanding Model ICB424FSGWine Storage Integrated Panels Models ICB427G and ICB427RGIntegrated Panels ICBWS-30 Overlay Overlay Panel SpecificationsWine Storage Model ICBWS-30 Overlay PanelFlush Inset Panel Specifications Flush Inset PanelICBWS-30 Flush Inset 13 mm Dual Standard InstallationsDual Flush Inset Installations Dual Flush Inset Panel SpecificationsICBWS-30 Dual Flush Inset Damage to the panels and the Sub-Zero unit Dual Flush Inset PanelsWine Storage Side Panels Handle HardwareModel ICBWS-30 Wine Storage Accessories DimensionDoor Frame Profile Wine Storage Wine Shelf Wood Facing Wine Storage Door Clearance SUB-ZERO, INC
Related manuals
Manual 78 pages 23.73 Kb

ICBBI-36R 662, ICBBI-36U, ICBBI-36F, ICBBI-36S, ICBBI-30U specifications

The Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG are premium built-in refrigerators designed to combine cutting-edge technology with sophisticated aesthetics, making them a perfect addition to any modern kitchen. These models stand out for their impressive capacity, advanced features, and customizable design, ensuring they meet the needs of discerning homeowners and culinary enthusiasts alike.

One of the main features of these refrigerators is their dual refrigeration system. By maintaining separate cooling environments for the refrigerator and freezer compartments, Sub-Zero ensures optimal freshness and preservation of food. This technology helps to reduce the chances of odor transfer between compartments, allowing fruits, vegetables, and other perishables to maintain their flavor and nutritional value for longer periods.

The ICBBI-36R model is designed specifically for refrigeration, while the ICBBI-36F focuses on freezing, and the ICBBI-36RG seamlessly combines both. Each unit provides ample storage space, enhancing functionality without compromising on style. The sleek stainless-steel finish and customizable panels enable integration into any kitchen decor, creating a streamlined appearance that suits high-end designs.

Temperature management is a standout characteristic of these units. Sub-Zero refrigerators are equipped with advanced microprocessor controls that monitor and adjust temperatures to ensure optimal conditions for every type of food. The units also feature air purification systems that filter out contaminants and ethylene gas, which can cause fruits and vegetables to ripen too quickly.

Energy efficiency is another critical consideration in these models. Sub-Zero has incorporated energy-saving technologies that meet stringent efficiency guidelines while still delivering superior cooling performance. These refrigerators use less energy than traditional models, aligning with modern consumers' growing interest in sustainability.

Furthermore, the ICBBI-36 line includes various features designed for convenience, such as adjustable shelving and storage bins, providing ease of organization. The door panel ice maker and water dispenser in the ICBBI-36RG model add an extra layer of convenience for users.

Overall, the Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG embody a perfect blend of innovation, style, and functionality. With advanced refrigeration technologies, customizable design, and energy efficiency, these models offer a top-tier solution for preserving food while elevating kitchen aesthetics.