Sub-Zero ICBBI-42SD, ICBBI-48SD, ICBBI-30U, ICBBI-36S, ICBBI-36F, ICBBI-36U manual Panel Requirements

Page 47

Integrated Refrigeration

47

Cabinetry Applications

Integrated refrigeration is compatible with virtually any style and look of cabinetry. These models can be used with framed as well as frameless cabinetry. Because of the precise application and the look you may want to achieve, keep the following considerations in mind:

The thickness of the front panels can vary. A minimum 16

mmthick panel is required, but the thickness can be increased provided the panel weight limit is not exceeded.

IMPORTANT NOTE: The depth of each integrated model is 610 mm from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.

Reveals between panels can vary. A reveal of 3 mm is typical, but reveals can be increased to up to 6 mm.

As reveals between cabinetry and the unit decrease, the potential exists for severe finger pinching while the door is closing.

When 19 mm or thicker panels are used with a reveal of less than 6 mm, door panels may cause damage to the unit when the door is opened to the maximum 105°.

Use the built-in 90° door stop.

subzero.com/specs

IMPORTANT NOTE: The inside edges of the rough opening as well as the sides and a portion of the backside of the decorative panels will need to be finished, as they will be exposed when the doors are open.

D-style handles are recommended. For the cabinet door, handles must be located near the edge of the panel opposite the hinge, centered top to bottom. Locate handles in the top center area of the drawer panels.

Illustrations on the following pages show typical applica- tions of frameless and framed cabinetry. Also refer to the full-scale illustration at the end of this section for specifics on door openings.

Panel Requirements

TALL AND DRAWER MODELS

MAX WEIGHT

686 mm Door Panel

18 kg

686 mm Drawer Panel

5 kg

914 mm Door Panel

24 kg

914 mm Drawer Panel

7 kg

PANEL THICKNESS

MINIMUM

All Panels

16 mm

 

 

Image 47
Contents International Design Guide Contents BUILT-IN Models KEY FeaturesBuilt-In Refrigeration All Refrigerator / All Freezer Models SpecificationsOverall Dimensions Built-In Refrigeration Built-In ModelsBuilt-In Refrigeration Over-and-Under Models Model ICBBI-36S Built-In Refrigeration Side-by-Side ModelsModels ICBBI-48S and ICBBI-48SD Opening Width Standard InstallationElectrical Requirements Built-In Refrigeration Planning InformationElectrical Requirements Plumbing RequirementsOverlay Panel Requirements Built-In Refrigeration Overlay PanelsModel ICBBI-36U Model ICBBI-30UModels ICBBI-48S and ICBBI-48SD Model ICBBI-36SModel ICBBI-42S Built-In Refrigeration Flush Inset Application Flush Inset Opening Widths Flush Inset InstallationFlush Inset Panel Requirements Built-In Refrigeration Flush Inset PanelsPanel Offsets Illus Panel OffsetsICBBI-30U / ICBBI-36U Dispenser ICBBI-48SD Model ICBBI-48SD Built-In Refrigeration DispenserBuilt-In Refrigeration Side Panels Standard Application Built-In Refrigeration Dual InstallationDual Installation Panel Requirements Opening Widths Flush Inset Application 665 mm Flush Inset Panel Offsets ICBBI-30U Built-In Refrigeration Dual Installation-Flush Inset PanelsDual Wide Grille-Overlay Built-In Refrigeration Dual Installation KitInstallation with Dual Wide Grille Installation with Individual GrillesStandard Handles Length Stud Spacing Built-In Refrigeration AccessoriesStandard Handles FULL-SCALE Template Built-In Refrigeration Overlay Panel ThicknessBuilt-In Refrigeration Overlay Application 610 mm Dual Installation-Standard Dual Installation-Flush Inset PRO 48 Models PRO 48 RefrigerationPRO 48 Refrigeration PRO 48 Models Capacity / WeightOpening Dimensions Standard Flush Standard and Flush BUILT-IN InstallationsPRO 48 Refrigeration Planning Information PRO 48 Refrigeration Accessories Integrated Models Integrated RefrigerationMm Tall Models Integrated Refrigeration Overall DimensionsDrawer Models Capacity and WeightOpening Dimensions Integrated Refrigeration Opening DimensionsIntegrated Refrigeration Electrical Requirements Integrated Refrigeration Plumbing Requirements Frameless Cabinetry Typical Panel DimensionsIntegrated Refrigeration Cabinetry Applications TOE Kick Clearance Door Panel HeightPanel Requirements Mm is possible with adjustments to panel dimensions Dual InstallationsIntegrated Refrigeration Accessories Opening Maximum Door OpeningWine Storage Models Wine StorageUndercounter Wine Storage Wine Storage Overall DimensionsFULL-SIZE Wine Storage Model ICBWS-30 Storage Capacity Bottles 750 mlModels ICB427G and ICB427RG Wine Storage Opening Dimensions2127 mm 746 mm Wine Storage Planning Information Dual InstallationsOverlay Panels Wine Storage Door PanelsModel ICB424G Freestanding Model ICB424FSGIntegrated Panels Wine Storage Integrated PanelsModels ICB427G and ICB427RG ICBWS-30 Overlay Overlay Panel SpecificationsWine Storage Model ICBWS-30 Overlay PanelICBWS-30 Flush Inset Flush Inset Panel SpecificationsFlush Inset Panel 13 mm Dual Standard InstallationsICBWS-30 Dual Flush Inset Dual Flush Inset InstallationsDual Flush Inset Panel Specifications Damage to the panels and the Sub-Zero unit Dual Flush Inset PanelsModel ICBWS-30 Wine Storage Side PanelsHandle Hardware Door Frame Profile Wine Storage AccessoriesDimension Wine Storage Wine Shelf Wood Facing Wine Storage Door Clearance SUB-ZERO, INC
Related manuals
Manual 78 pages 23.73 Kb

ICBBI-36R 662, ICBBI-36U, ICBBI-36F, ICBBI-36S, ICBBI-30U specifications

The Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG are premium built-in refrigerators designed to combine cutting-edge technology with sophisticated aesthetics, making them a perfect addition to any modern kitchen. These models stand out for their impressive capacity, advanced features, and customizable design, ensuring they meet the needs of discerning homeowners and culinary enthusiasts alike.

One of the main features of these refrigerators is their dual refrigeration system. By maintaining separate cooling environments for the refrigerator and freezer compartments, Sub-Zero ensures optimal freshness and preservation of food. This technology helps to reduce the chances of odor transfer between compartments, allowing fruits, vegetables, and other perishables to maintain their flavor and nutritional value for longer periods.

The ICBBI-36R model is designed specifically for refrigeration, while the ICBBI-36F focuses on freezing, and the ICBBI-36RG seamlessly combines both. Each unit provides ample storage space, enhancing functionality without compromising on style. The sleek stainless-steel finish and customizable panels enable integration into any kitchen decor, creating a streamlined appearance that suits high-end designs.

Temperature management is a standout characteristic of these units. Sub-Zero refrigerators are equipped with advanced microprocessor controls that monitor and adjust temperatures to ensure optimal conditions for every type of food. The units also feature air purification systems that filter out contaminants and ethylene gas, which can cause fruits and vegetables to ripen too quickly.

Energy efficiency is another critical consideration in these models. Sub-Zero has incorporated energy-saving technologies that meet stringent efficiency guidelines while still delivering superior cooling performance. These refrigerators use less energy than traditional models, aligning with modern consumers' growing interest in sustainability.

Furthermore, the ICBBI-36 line includes various features designed for convenience, such as adjustable shelving and storage bins, providing ease of organization. The door panel ice maker and water dispenser in the ICBBI-36RG model add an extra layer of convenience for users.

Overall, the Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG embody a perfect blend of innovation, style, and functionality. With advanced refrigeration technologies, customizable design, and energy efficiency, these models offer a top-tier solution for preserving food while elevating kitchen aesthetics.