Sub-Zero ICBBI-48SD, ICBBI-42S PRO 48 Refrigeration Planning Information, Electrical Requirements

Page 37

PRO 48 Refrigeration

37

Planning Information

PRO 48 models can be used freestanding or installed as a standard or flush built-in application. For standard built-in installations, the face frame of the unit will extend 51 mm beyond cabinetry. In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.

ELECTRICAL REQUIREMENTS

International models from the factory designed without a transformer require a 220-240 V AC, 50/60 Hz electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device.

For PRO 48 models, the electrical supply should be located within the shaded area shown in the illustration below. Follow local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appli- ance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of opera- tion.

Electrical Requirements

Power Supply

220-240 V AC, 50/60 Hz

Circuit Breaker

10 amp

Receptacle

3-prong grounding-type

 

 

FRONT VIEW

178

E

mm

 

 

152

 

mm

1918 mm

 

FROM

 

FLOOR

 

subzero.com/specs

PLUMBING REQUIREMENTS

PRO 48 models come with an automatic ice maker. The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available through your authorized Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 2.4 bar to 8.3 bar supplied to the unit at all times.

Plumbing Requirements

Water Supply Line

6.35 mm OD copper line

Water Pressure

2.4–8.3 bar

Excess Water Line for Connection

914 mm

152

 

mm

132

76 mm

mm

FLOOR

 

FRONT VIEW

 

Location of water supply.

Location of electrical supply.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents International Design Guide Contents Built-In Refrigeration KEY FeaturesBUILT-IN Models Overall Dimensions SpecificationsBuilt-In Refrigeration Built-In Models All Refrigerator / All Freezer ModelsBuilt-In Refrigeration Over-and-Under Models Model ICBBI-36S Built-In Refrigeration Side-by-Side ModelsModels ICBBI-48S and ICBBI-48SD Opening Width Standard InstallationElectrical Requirements Built-In Refrigeration Planning InformationPlumbing Requirements Electrical RequirementsOverlay Panel Requirements Built-In Refrigeration Overlay PanelsModel ICBBI-36U Model ICBBI-30UModel ICBBI-42S Model ICBBI-36SModels ICBBI-48S and ICBBI-48SD Built-In Refrigeration Flush Inset Application Flush Inset Opening Widths Flush Inset InstallationFlush Inset Panel Requirements Built-In Refrigeration Flush Inset PanelsPanel Offsets Illus Panel OffsetsICBBI-30U / ICBBI-36U Dispenser ICBBI-48SD Model ICBBI-48SD Built-In Refrigeration DispenserBuilt-In Refrigeration Side Panels Dual Installation Panel Requirements Built-In Refrigeration Dual InstallationStandard Application Opening Widths Flush Inset Application 665 mm Flush Inset Panel Offsets ICBBI-30U Built-In Refrigeration Dual Installation-Flush Inset PanelsInstallation with Dual Wide Grille Built-In Refrigeration Dual Installation KitInstallation with Individual Grilles Dual Wide Grille-OverlayStandard Handles Built-In Refrigeration AccessoriesStandard Handles Length Stud Spacing FULL-SCALE Template Built-In Refrigeration Overlay Panel ThicknessBuilt-In Refrigeration Overlay Application 610 mm Dual Installation-Standard Dual Installation-Flush Inset PRO 48 Models PRO 48 RefrigerationPRO 48 Refrigeration PRO 48 Models Capacity / WeightOpening Dimensions Standard Flush Standard and Flush BUILT-IN InstallationsPRO 48 Refrigeration Planning Information PRO 48 Refrigeration Accessories Integrated Models Integrated RefrigerationMm Tall Models Integrated Refrigeration Overall DimensionsDrawer Models Capacity and WeightOpening Dimensions Integrated Refrigeration Opening DimensionsIntegrated Refrigeration Electrical Requirements Integrated Refrigeration Plumbing Requirements Integrated Refrigeration Cabinetry Applications Typical Panel DimensionsFrameless Cabinetry TOE Kick Clearance Door Panel HeightPanel Requirements Mm is possible with adjustments to panel dimensions Dual InstallationsIntegrated Refrigeration Accessories Opening Maximum Door OpeningWine Storage Models Wine StorageUndercounter Wine Storage Wine Storage Overall DimensionsFULL-SIZE Wine Storage Model ICBWS-30 Storage Capacity Bottles 750 mlModels ICB427G and ICB427RG Wine Storage Opening Dimensions2127 mm 746 mm Wine Storage Planning Information Dual InstallationsModel ICB424G Wine Storage Door PanelsFreestanding Model ICB424FSG Overlay PanelsModels ICB427G and ICB427RG Wine Storage Integrated PanelsIntegrated Panels Wine Storage Model ICBWS-30 Overlay Panel SpecificationsOverlay Panel ICBWS-30 OverlayFlush Inset Panel Flush Inset Panel SpecificationsICBWS-30 Flush Inset 13 mm Dual Standard InstallationsDual Flush Inset Panel Specifications Dual Flush Inset InstallationsICBWS-30 Dual Flush Inset Damage to the panels and the Sub-Zero unit Dual Flush Inset PanelsHandle Hardware Wine Storage Side PanelsModel ICBWS-30 Dimension Wine Storage AccessoriesDoor Frame Profile Wine Storage Wine Shelf Wood Facing Wine Storage Door Clearance SUB-ZERO, INC
Related manuals
Manual 78 pages 23.73 Kb

ICBBI-36R 662, ICBBI-36U, ICBBI-36F, ICBBI-36S, ICBBI-30U specifications

The Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG are premium built-in refrigerators designed to combine cutting-edge technology with sophisticated aesthetics, making them a perfect addition to any modern kitchen. These models stand out for their impressive capacity, advanced features, and customizable design, ensuring they meet the needs of discerning homeowners and culinary enthusiasts alike.

One of the main features of these refrigerators is their dual refrigeration system. By maintaining separate cooling environments for the refrigerator and freezer compartments, Sub-Zero ensures optimal freshness and preservation of food. This technology helps to reduce the chances of odor transfer between compartments, allowing fruits, vegetables, and other perishables to maintain their flavor and nutritional value for longer periods.

The ICBBI-36R model is designed specifically for refrigeration, while the ICBBI-36F focuses on freezing, and the ICBBI-36RG seamlessly combines both. Each unit provides ample storage space, enhancing functionality without compromising on style. The sleek stainless-steel finish and customizable panels enable integration into any kitchen decor, creating a streamlined appearance that suits high-end designs.

Temperature management is a standout characteristic of these units. Sub-Zero refrigerators are equipped with advanced microprocessor controls that monitor and adjust temperatures to ensure optimal conditions for every type of food. The units also feature air purification systems that filter out contaminants and ethylene gas, which can cause fruits and vegetables to ripen too quickly.

Energy efficiency is another critical consideration in these models. Sub-Zero has incorporated energy-saving technologies that meet stringent efficiency guidelines while still delivering superior cooling performance. These refrigerators use less energy than traditional models, aligning with modern consumers' growing interest in sustainability.

Furthermore, the ICBBI-36 line includes various features designed for convenience, such as adjustable shelving and storage bins, providing ease of organization. The door panel ice maker and water dispenser in the ICBBI-36RG model add an extra layer of convenience for users.

Overall, the Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG embody a perfect blend of innovation, style, and functionality. With advanced refrigeration technologies, customizable design, and energy efficiency, these models offer a top-tier solution for preserving food while elevating kitchen aesthetics.
Top Page Image Contents