Traulsen G-Series owner manual VII. k Setting the Date

VII. MICROPROCESSOR CONTROL (continued)

VII. k - SETTING THE DATE:

The date must be set in order for the data storage memory to correctly log events. Follow the instruc-

tions to enter the customer access code on page 7. When the control displays Thermostat

Set Point High, press the down arrow key until the control display reads Date. Press

the set button SET .			The display will show						(year). The right two numbers will be flashing.
Press the arrow keys						to set the year. When the correct year is displayed, press the set
button SET .	The display will show							(month). The right two numbers will be flashing. Use
the arrow keys					to set the month.			When the correct month is displayed, press the set
button SET .		The display will show						(day). The right two numbers will be flashing. Press
the arrow keys					to set the day.		When the correct day is displayed, press the set button
SET . The display will then read							Thermostat Set Point High. You can use the up or down
arrow keys				to scroll to the next parameter, or wait 30 seconds for the control to return to
normal operation.

VIII. l - SETTING DAYLIGHT SAVINGS TIME:

This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the instructions to enter the customer access code on page 7. When the control dis-

plays		Thermostat Set Point High, press the down arrow key			until the display reads
	Daylight Savings Time. Press the set button		SET . The display will show				Day-
light Savings Time (Yes, automatically adjust for Daylight Savings Time).					For “YES,” press the set
button SET , for “NO” press the up or down arrow key				. The display will read
Daylight Savings Time (no). Press the set button SET			. The display will read			Thermostat
Set Point High. You can press the the up or down arrow keys					to scroll to the next para-
meter or wait 30 seconds for the control to return to normal operation.

-11-