True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
REQUIRED TOOLS
•Phillips Screwdriver
•Stiff Bristle Brush
•Adjustable Wrench
STEP 1
Disconnect power to unit.
STEP 2
Take off lower grill assembly by removing all screws.
STEP 3
Remove bolts anchoring compressor assembly to frame rails and carefully slide out. (tube connections are flexible)
STEP 5
Lift cardboard cover above fan at plastic plugs and carefully clean condenser coil and fan blades.
STEP 6
After brushing condenser coil vacuum dirt from coil, and interior floor.
STEP 7
Replace cardboard cover. Carefully slide compressor assembly back into position and replace bolts.
STEP 8
Reinstall louver assembly onto unit with appropriate fasteners and clips. Tighten all screws.
STEP 4 |
|
|
| STEP 9 |
|
|
| ||
|
|
|
|
Clean off accumulated dirt from condensing coil with a stiff bristle brush.
Connect unit to power and check to see if condenser is running.
T
M C
TRUE
16 | www.truemfg.com | 16 |