True Manufacturing Company TBB-3G-S, TD-50-18-S-LT, TDD-4, TBB-2, TDB-24-48-1-G-1 Safety Precautions

Page 3

True Food Service Equipment, Inc.

SAFETY INFORMATION

How to Maintain Your Unit to Receive the Most Efficient and

Successful Operation

You have selected one of the finest commercial refrigeration units made. It is manufactured under

strict quality controls with only the best quality materials available. Your TRUE cooler when

properly maintained will give you many years of trouble-free service.

WARNING!

Use this appliance for its intended purpose as described in this Owner Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small; be careful closing doors when children are in the area.

NOTE: We strongly recommend that any servicing be preformed by a qualified individual.

Unplug the refrigerator before cleaning and making repairs.

Setting temperature controls to the 0 position does not remove power to the light circuit, perimeter heaters, or evaporator fans.

1

www.truemfg.com

1

Image 3
Contents BAR Equipment Glass Chillers True Food Service Equipment, Inc Safety Precautions Refrigerant Disposal Proper Disposal of the RefrigeratorUSE of Extension Cords Before You Throw Away Your Old Refrigerator or FreezerNorth America Use Only HOW to Connect ElectricityStep Installation / Operation Instructions OwnershipRequired Tools UncratingLocating LevelingTools Required Conductors and Circuits NSF Approved Sealants Sealing Cabinet to FloorPosition Cabinet Step Level CabinetNext Install Draft ARMElectrical Instructions Beer DispensersStartup Install Draft ARMLight Switch Location Replacement PartsStorage and Handling Shelf InstallationHorizontal Bottle Cooler BIN Divider Installation OperationTDD-1 CO2 KNOCK-OUT TemperaturePressure TappingBad Taste Draft Beer ProblemsDanfoss Temperature Control High Altitude Adjustment Only Temperature Control Adjustment for High Altitude onlyDont lay CO2 cylinders flat Dont drop CO2 cylinders Pressure Adjustment on CO2 RegulatorChanging CO2 GAS Cylinder Decreasing PressureCleaning Cleaning BAR SystemCleaning kit purchased from True follow these instructions Prepare SolutionStep MAINTENANCE, Care & Cleaning Cleaning the Condenser CoilDisconnect the electrical power to the unit Remove the louvered grillSaturday 745 a.m. to 1145 a.m. CST Stainless Steel Equipment Care and Cleaning Stainless Steel Equipment Care and Cleaning Light Bulb Replacement IDL Integrated Door Lighting Warranty Information U.S.A. and Canada only