True Manufacturing Company TCGR-77 guide

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

OPTIONAL (INSTALLING OPTIONAL FORMICA KIT)

FORMICA KIT INSTALLATION:

FORMICA KIT COMPONENTS:

(2)Formica Top End Panels 103/4"w x 33"h (27.3 cm x 83.8 cm).

(2)Bottom End Panels

(1)left side, (1) right side (Formica glued to black plastic panel with 4 key hole slots).

(1)Formica Front Panel

width will vary x 75/8"h (19.4 cm)

NOTE

Please use care when installing the Formica. Formica can chip, crack, or break.

NOTE

Refer to image 1 for placement of Formica panels.

A.Install the front Formica panel.

Be sure bottom end panels are off in order to install front panel. Slide front panel into top and bottom tracks on the front of the cabinet. Make sure panel is even on both left and right end of the cabinet (images 1 & 2).

B.Install the top end Formica panels (one on each side.

NOTE

After installing the bottom end pieces the top end panel will stay in place.

C.Install the bottom end Formica panels (one on each side.

(Formica is pre-glued to black plastic panel).

Line up the four keyhole slots in each bottom end piece to the (4) screws on the side of the cabinet. Slip the (4) large keyholes from the bottom end piece over the (4) screws. Then push down to fasten the bottom end piece onto the cabinet (images 1 & 3).

NOTE

The bottom left and right pieces are not the same. The taller part of the bottom end piece goes to the rear of the cabinet as shown in image 3.

Be sure bottom end panels are off in order to install top end Formica panel. Both top end panels are the same

STEP A

size so they each can be used for left or right of the cabinet.

	Slide panel up into black plastic tracks on the	1
	top side panel of each end of cabinet (images	1
	top side panel of each end of cabinet (images	STEP C
	1 & 3).	STEP C
		Four keyholes
		on backside.

				Formica.
				2	Tracks to
				2	hold Formica. STEP B
Formica top	Formica top	Formica bottom		STEP A
end panel	end panel	end panel will lock		Side view of Formica sliding
will slide up	will rest on	through keyholes on		Side view of Formica sliding
will slide up	will rest on	through keyholes on		into place for front panel and
into plastic	screw.	backside of bottom	3	into place for front panel and
tracks.		end piece.	3	top end panel.
tracks.		end piece.
12	............ www.truemfg.com					12