True Manufacturing Company TCGDZ-50 installation manual Safety Precautions

Page 3

True Food Service Equipment, Inc.

SAFETY INFORMATION

How to Maintain Your Unit to Receive the Most Efficient and Successful Operation

You have selected one of the finest display cases made. It is manufactured under strict quality

controls with only the best quality materials available. Your TRUE cooler, when properly

maintained, will give you many years of trouble-free service.

WARNING!

Use this appliance for its intended purpose as described in this Owner Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

This display case must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the display case. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the refrigerat- ed compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small; be careful closing doors when children are in the area.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Unplug the refrigerator before cleaning and making repairs (switch power off at breaker for hard wired models).

Setting temperature controls to the 0 position does not remove power to the light circuit, perimeter heaters, or evaporator fans.

1

www.truemfg.com

1

Image 3
Contents Curved Glass Display Cases True Manufacturing Company, Inc Safety Precautions USE of Extension Cords Proper Disposal of the Display CaseNever USE AN Adapter Plug For models with standard power cordTrue is not responsible for damage incurred during shipment Installation / Operation Instructions OwnershipRequired Tools UncratingTools Required Warranty is void if ventilation is insufficientLocating LevelingElectrical Instructions Conductors and Circuits Replacement Parts StartupRecommendation Attached caps are plugged into Shelving Installation Refrigerated BakeryShelf Installation For lights to work. If less thanCastor Installation Tools Required Optional Installing Optional CastorsOptional Installing Optional Formica KIT Formica KIT Installation Formica KIT ComponentsRefer to image 1 for placement of Formica panels Optional Sealing Cabinet to Floor Cabinet CleaningLight Bulb Replacement Shelf Mounted Bulb ReplacementInterior TOP Bulb Replacement Controller functions closer to sea level Temperature Control Adjustment for High Altitude onlyDanfoss Temperature Control TermsCondenser Cleaning Tools Required Cleaning the Condenser CoilImportant Warranty Information Stainless Steel Equipment Care and Cleaning Stainless Steel Equipment Care and Cleaning Warranty Information U.S.A. and Canada ONLY! U.S.A