Gladiator Garageworks W10131416A Lower Front Corner, Lower Rear Corner, Complete the Installation

Page 7

7.Remove the casters and fasteners from the box.

8.Locate and remove the caster brackets from the FeaturePak.

9.Using ⁵⁄₁₆—18 x ⁷⁄₈" hex-head bolts, attach one rigid caster and one swivel caster to each caster bracket. The rigid caster fits the front of the bracket and the swivel caster fits on the rear.

10.Insert the hex-head bolts from the bottom and start the self- locking nuts for each caster.

A

B

 

 

 

 

C

 

 

 

 

 

 

 

 

D

 

 

 

 

A. Self-locking nut

C. ⁵⁄₁₆—18 x ⁷⁄₈" Hex-head bolt

B. Caster bracket

D. Caster

11.Hold the head of the hex-head bolts with a wrench while tightening the self-locking nuts with a socket wrench.

12.Using a ¹⁄₂" socket wrench, remove the four unit bolts (two on each side) from the lower front and rear of the refrigerator. NOTE: Do not remove leveling bolt.

Lower Front Corner

A

B

A. Leveling bolt (do not remove)

B. Refrigerator/freezer unit bolt

13.Place the slot in the rear of the caster bracket over the unit hole in the rear of the refrigerator. Align the hole in the front of the caster bracket with the unit hole in the front of the refrigerator.

Lower Rear Corner

A

B

A. Refrigerator/freezer rear unit hole

B. Caster bracket

14.Hold the bracket in place and insert the unit bolts into the front and rear unit holes and tighten.

NOTE: Do not overtighten the bolts.

15.Insert two of the ¼—20 x 1¹⁄₄" self-tapping hex-head bolts and lock washers into the two holes in the side of the caster bracket. Push the caster bracket against the bottom of the refrigerator and tighten the bolts using a ³⁄₈" socket wrench.

A

A. Caster bracket holes

16.Repeat steps 12 to 15 for the other caster bracket.

Complete the Installation

1.Lock the front casters.

NOTE: Locking the casters will help prevent the refrigerator from moving while it is being lifted.

2.Insert a small piece of cardboard between the caster brake and the floor. This will help prevent the brake from rubbing on the floor.

3.Stand the refrigerator upright.

4.Replace the base grille by placing the metal clips in the openings in the metal panel and rolling the grille downward until it snaps into place.

5.Unlock the casters and move the refrigerator into its final location.

6.Lock the casters.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorElectrical Requirements Location RequirementsRecommended Grounding Method Final Steps Refrigerator DoorsRemove Doors and Hinges Replace Doors and Hinges Reverse Doors optionalDoor Swing Reversal optional Door Alignment Adjust the DoorsCaster Installation Door ClosingLower Front Corner Complete the InstallationLower Rear Corner Refrigerator Care Using the ControlsCleaning Refrigerator USETemperature and Moisture TroubleshootingRefrigerator Operation Gladiator Garageworks Major Appliance Warranty Seguridad DEL Refrigerador Refrigerador Para Garage ChilleratorQuitar los materiales de empaque Instrucciones DE InstalaciónDesempaque el Refrigerador Antes de tirar su viejo refrigerador o congeladorImportante Requisitos de ubicaciónRequisitos eléctricos Método de conexión a tierra recomendadoPasos finales Puertas del refrigeradorCómo quitar las puertas y las bisagras Cómo volver a poner las puertas y las bisagras en su lugarCómo quitar y volver a poner la puerta en su lugar Alineamiento de la puerta Ajuste las puertasInstalación de las ruedecillas Cierre de la puertaRuedecilla Esquina inferior traseraBisagra superior Bisagra central Contratuerca Perno de cabeza Soporte de ruedecillaUso de los controles Cuidado DE SU RefrigeradorLimpieza Cómo cambiar los focos Solución DE ProblemasFuncionamiento del refrigerador La temperatura está demasiado caliente Temperatura y humedadLa puerta no cierra completamente Es difícil abrir la puertaGarantía Limitada DE UN AÑO Gladiator GarageworksVotre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurNettoyage avant l’utilisation Instructions DinstallationDéballage du réfrigérateur Enlèvement des matériaux d’emballageMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Inversion des portes facultatif Réinstallation Portes et charnièresPortes du réfrigérateur Démontage Portes et charnièresFermeture des portes Ajustement des portesPièces Fournies Installation des roulettesAlignement des portes Outils NécessairesAngle inférieur/arrière Utilisation des commandesAngle inférieur/avant Achever linstallation Utilisation DU RéfrigérateurNettoyage de votre réfrigérateur Remplacement des ampoules d’éclairageAjustement des réglages de commandes NettoyageFonctionnement du réfrigérateur DépannageTempérature et humidité Garantie Limitée DE UN AN Garantie DES Gros Appareils Ménagers Gladiator GarageworksW10131416A EN/FR PN W10131408A

W10131416A, GARF19XXVK specifications

The Gladiator Garageworks GARF19XXVK, W10131416A is a cutting-edge storage solution designed for both functionality and aesthetic appeal in any garage or workspace. This versatile garage storage unit is engineered to withstand the rigors of daily use while maintaining an organized and neat environment.

One of the standout features of the GARF19XXVK is its robust construction. Made from heavy-duty steel, the unit promises durability and resistance to rust and corrosion. With a powder-coated finish, it not only enhances the visual appeal but also adds an extra layer of protection against wear and tear.

The GARF19XXVK is equipped with various shelves and compartments that can be easily adjusted to accommodate items of different sizes. The ability to personalize the shelf heights makes this unit exceptionally practical for storing everything from small tools to larger equipment. This customization feature is essential for maximizing space efficiency, making it ideal for garages of all sizes.

Another notable aspect of the GARF19XXVK is its innovative locking mechanism, which ensures the security of your tools and valuables. This feature is particularly important for homeowners who want to protect their investments from theft or unauthorized access. The unit also includes rubberized feet to prevent slipping, enhancing both stability and safety.

The design of the GARF19XXVK emphasizes both style and functionality, featuring an attractive black finish that can seamlessly integrate into any décor. The sleek look is complemented by its modern profile, making it not just a storage solution but a stylish addition to your garage or workspace.

Technologically, the GARF19XXVK incorporates precision engineering for ease of assembly. It requires minimal tools for setup, allowing users to put together the unit quickly and efficiently. The thoughtful design also includes cutouts to facilitate cable management, promoting a clean and organized environment.

Finally, the GARF19XXVK is compatible with the Gladiator system, allowing for easy integration with other Gladiator products. This compatibility opens up the possibility for extensive customization, letting users create their ideal storage solutions tailored to individual needs.

In summary, the Gladiator Garageworks GARF19XXVK, W10131416A stands out due to its durability, versatile storage options, security features, and stylish design, making it a must-have for anyone looking to optimize their garage space.
Top Page Image Contents