3.Pull the surface unit straight away from the receptacle.
4.Lift out the reflector bowl. On Model RF365PXY, Q series, also lift out the trim ring. See Ueaning chart” on pages 26 and 27 for cleaning instructions.
Replacing
1.Make sure all surface units are off and cool before replacing surface units and reflector bowls.
2.Line up openings in the reflector bowl and (Model RF365PXY. Q series) notches in the trim ring with the surface unit receptacle and the element hold- down clip.
3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
(Model RF365PXY. Q series, shown)
.b
9
(Model RF365PXY, Q series, shown)
24