Marantz SR7009 oDynamic Compression, oLow Frequency Effects, oCenter Gain, Contents, Connections

Contents Connections Playback Settings Tips Appendix

oDynamic Compression

Compress dynamic range (difference between loud and soft sounds).

Auto:	Automatic dynamic range compression
	on/off control according to source.
Low / Medium / High:	These set the compression level.
Off:	Dynamic range compression is always off.

0“Dynamic Compression” can be set when Dolby Digital, Dolby Digital Plus or Dolby TrueHD signal is input.

0The default setting is “Off”. When the input signal is the Dolby TrueHD or Dolby Atmos source, the default setting is “Auto”.

oLow Frequency Effects

Adjust the low frequency effects level (LFE).

nWhen “Input Mode” is set other than to “7.1CH IN”

-10 dB – 0 dB (Default : 0 dB)

nWhen “Input Mode” is set to “7.1CH IN”

0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)

For proper playback of the different sources, we recommend setting to the values below.

0Dolby Digital sources : 0 dB

0DTS movie sources : 0 dB

0DTS music sources: -10 dB

oCenter Gain

Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front.

0.0 – 1.0

0You can set this when the sound mode is set to DTS Neo:X.

0The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front.

Front panel Display Rear panel 183 Remote Index