Contents | Connections | Playback | Settings | Tips | Appendix |
oDetailed settings when “Assign Mode” is set to “7.1ch + ZONE2”
When “Assign Mode” is set to “7.1ch + ZONE2”, set the following items.
nSpeakers for ZONE2
Select speaker terminals that output audio in ZONE2.
The channels of speaker terminals selected for ZONE2 cannot be output in MAIN ZONE.
FRONT WIDE/ | Outputs audio in ZONE2 from FRONT WIDE/ | |
HEIGHT2 | ||
HEIGHT2 speaker terminals. | ||
(Default): | ||
| ||
HEIGHT1: | Outputs audio in ZONE2 from HEIGHT1 | |
speaker terminals. | ||
| ||
SURROUND BACK: | Outputs audio in ZONE2 from SURROUND | |
BACK speaker terminals. |
nHeight Layout
Select the height channel used.
This can be selected when the “Speakers for ZONE2” setting is “FRONT WIDE/HEIGHT2” or “SURROUND BACK”.
|
|
|
|
| AUDIO OUT connectors |
| HEIGHT1 |
| Select items |
| |
|
|
| |
None |
| No height channels are used. | |
Front Height |
| Front Height | |
(Default) |
| ||
|
| ||
Top Front |
| Top Front | |
Top Middle |
| Top Middle | |
Top Rear |
| Top Rear | |
Rear Height |
| Rear Height | |
Front Dolby |
| Front Dolby | |
Surround Dolby |
| Surround Dolby |
Front panel | Display | Rear panel | 229 | Remote | Index |