Marantz SR7009 owner manual Desired sound does not come out, 243

Contents Connections Playback Settings Tips Appendix

oDesired sound does not come out

Symptom				Cause / Solution			Page
The volume does not	0	The maximum volume is set too low. Set the maximum volume using “Limit” on the menu.					186
increase.
	0	Appropriate volume correction processing is performed according to the input audio format and settings,					－
		so the volume may not reach the upper limit.
No sound comes out with	0	Check the connection of the HDMI connectors.					60
the HDMI connection.
	0	When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output					196
		from the TV, set “TV”.
	0	When using the HDMI control function, check that the audio output is set to the AV amplifier on the TV.					156
No sound comes out of a	0	Check that speaker cables are properly connected.					39
specific speaker.
	0	Check that a selection other than “None” is set for the “Speaker Config.” setting in menu.					236
	0	Check the “Assign Mode” setting in the menu.					221
	0	When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and subwoofer.					－
No sound is produced from	0	Check the subwoofer connections.					40
subwoofer.
	0	Turn on the subwoofer’s power.					－
	0	Set “Speaker Config.” - “Subwoofer” in the menu to “1 spkr” or “2 spkrs”.					236
	0	When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the					236
		sound mode, no sound may be output from the subwoofer.
	0	When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the					243
		subwoofer.
	0	You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”.					243
DTS sound is not output.	0	Check that the digital audio output setting on the connected device is set to “DTS”.					－
	0	Set “Decode Mode” on the menu to “Auto” or “DTS”.					209
Dolby Atmos, Dolby	0	Make HDMI connections.					64
TrueHD, DTS-HD, Dolby
	0	Check the digital audio output setting on the connected device. On some devices, “PCM” is set by					－
Digital Plus audio is not		default.
output.
Front panel		Display	Rear panel	285	Remote	Index