Contents | Connections | Playback | Settings | Tips | Appendix |
oCannot connect to a wireless LAN network
Symptom |
| Cause / Solution | Page |
Cannot connect to the | 0 | The network name (SSID), password and encryption setting have not been set up correctly. Configure the | 249 |
network. |
| network settings according to the setting details of this unit. |
|
| 0 | Shorten the distance from the wireless LAN access point and remove any obstructions to improve access | - |
|
| first before |
|
|
| points. |
|
| 0 | Configure the access point channel settings away from channels that are being used by other networks. | - |
| 0 | This unit is not compatible with WEP (TSN). | - |
Cannot connect to WPS. | 0 | Check that the WPS mode of the router is operating. | - |
| 0 | Press the WPS button on the router and then press the “Connect” button displayed on the TV within 2 | - |
|
| minutes. |
|
| 0 | A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to | 249 |
|
| “None”, |
|
| 0 | If the router encryption method is | - |
|
| button. In this case, use the “Scan Networks” or “Manual” method to connect. |
|
Cannot connect to the | 0 | Update the iPhone/iPod touch/iPad firmware to the latest version. | - |
network using iPhone/iPod |
|
|
|
0 | When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS | - | |
touch/iPad. |
| 5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported. |
|
Front panel | Display | Rear panel | 297 | Remote | Index |