Marantz SR7009 owner manual Network, Information, Connection, Connect Using

Contents Connections Playback Settings Tips Appendix

Network

To use this unit by connecting it to a home network (LAN), you must configure network settings.

If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter information about your home network (LAN) such as the gateway address and subnet mask, etc.

Information

Display network information.

Friendly Name / Connection / SSID / DHCP / IP Address / MAC Address

MAC Address is required to create a vTuner account.

Connection

Choose whether to connect the home network to a wireless LAN or a wired LAN.

When connecting to the network using wired LAN, select “Wired (Ethernet)” after connecting a LAN cable,

When connecting to the network using wireless LAN, select “Wireless (Wi- Fi)” and configure the “Wi-Fi Setup”.

oConnect Using

Select the method for connecting to the home network (LAN). Wired (Ethernet): Use a LAN cable to connect to a network. Wireless (Wi-Fi):Use the wireless LAN (Wi-Fi) function to connect

to a network.

Front panel Display Rear panel 247 Remote Index