Marantz SR7009 owner manual Graphic EQ, Speaker Selection, Adjust EQ

On:

Off (Default):

Contents Connections Playback Settings Tips Appendix

Graphic EQ

Uses the graphic equalizer to adjust the tone of each speaker.

0Speakers for which “Graphic EQ” can be set differ according to the sound mode.

0This can be set when the “MultEQ® XT32” is set to “Off”. (v p. 187)

0This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

0This cannot be set when the input mode is set to “7.1CH IN”.

oGraphic EQ

Set whether to use the graphic equalizer or not.

Use the graphic equalizer.

Do not use the graphic equalizer.

Front panel Display Rear panel

oSpeaker Selection

Select whether to adjust tones for individual speakers or for all speakers.

All:	Adjust all speaker tones together.
Left/Right	Adjust the left and right speaker tones
(Default):	together.
Each:	Adjust the tone for each speaker.

oAdjust EQ

Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”.

1.Select the speaker.

2.Select the adjustment frequency band.

63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz / 16 kHz

3.Adjust the level.

–20.0 dB – +6.0 dB (Default : 0.0 dB)

Front Dolby, Surround Dolby and Back Dolby speakers can only be set when 63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.

191 Remote Index