Contents | Connections | Playback | Settings | Tips | Appendix |
|
|
|
|
|
|
3Connect the Sound calibration microphone to the SETUP MIC jack of this unit.
When the Sound calibration microphone is connected, the following screen is displayed.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand.
Set the following items if necessary.
Amp Assign
Channel Select
Check Results
Restore...
4Select “Start”, then press ENTER.
Audyssey® Setup can also make the following settings. 0 Amp Assign
The signals output from the SURROUND BACK, FRONT WIDE/ HEIGHT2 and HEIGHT1 speaker terminals can be switched in accordance with your speaker environment. (Amp
Assign (v p. 221))
0 Channel Select
If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced. You can also change the number of surround back speakers and subwoofer.
5Follow the instructions on the screen display and press “Next” to proceed further.
Start
Front panel | Display | Rear panel | 213 | Remote | Index |