Marantz SR7009 owner manual Pure Direct playback, Press Pure to select Direct

Contents Connections Playback Settings Tips Appendix

Direct playback

Sound recorded in source is played as is.

1Press PURE to select “Direct”.

Direct playback begins.

0While DSD signals are played back, “DSD Direct” is displayed.

0This can also be set by pressing PURE DIRECT on the main unit.

Pure Direct playback

This mode is for playback with higher sound quality than in Direct playback mode.

This mode turns off the main unit display and analog video circuit. Doing so suppresses noise sources that affect sound quality.

1Press PURE to select “Pure Direct”.

The display goes dark, and Pure Direct playback begins. The PURE DIRECT indicator lights.

0In Direct and Pure Direct sound modes, the following items cannot be adjusted. 0 Tone (v p. 138)

0 M-DAX (v p. 185)

0 MultEQ® XT32 (v p. 187)

0 Dynamic EQ (v p. 188)

0 Dynamic Volume (v p. 189)

0 Graphic EQ (v p. 191)

0This can also be set by pressing PURE DIRECT on the main unit.

NOTE

0 Video signals are only output when HDMI signals are played in the Pure Direct mode.

0 When the Pure Direct mode has been selected, the display turns off after about 5 seconds.

Front panel Display Rear panel 144 Remote Index