Contents | Connections | Playback | Settings | Tips | Appendix |
oWhen using HDMI ZONE2, the devices does not function properly
Symptom |
| Cause / Solution | Page | |
When using MAIN ZONE, | 0 | With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video | - | |
video output is interrupted |
| may be interrupted in HDMI ZONE2. |
| |
in HDMI ZONE2. |
|
|
| |
When using HDMI ZONE2, | 0 | Check that the power is on for ZONE2. | 173 | |
no video or audio is output |
|
|
| |
0 | Check the input source for ZONE2. | 173 | ||
from the TV in ZONE2. |
|
|
| |
0 | The | - | ||
| ||||
| 0 | In ZONE2, playback is only possible when the input signals are HDMI signals. | - | |
| 0 | When the TV does not support the input audio format, audio is not output. Set the audio format to “PCM” | 256 | |
|
| on the playback device. Alternatively, set “ZONE2 Setup” - “HDMI Audio” in the menu to “PCM”. |
| |
| 0 | When the TV is not compatible with the resolution of the input video, no video is output. Set the output | - | |
|
| resolution on the playback device to a resolution that is compatible with the TV. |
| |
When using HDMI ZONE2, | 0 | When the same input source is selected for MAIN ZONE and ZONE2, the audio format is limited | - | |
MAIN ZONE audio is |
| according to the specifications of the TV in ZONE2. |
| |
played back as PCM. |
|
|
|
Front panel | Display | Rear panel | 298 | Remote | Index |