Marantz SR7009 owner manual Audyssey, MultEQ XT32, Reference, Bypass, Flat

Contents Connections Playback Settings Tips Appendix

Audyssey

Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed.

For additional information on Audyssey technology, please see “Explanation of terms” (v p. 317).

0“MultEQ® XT32”, “Dynamic EQ”, “Reference Level Offset”, “Dynamic Volume”, “Audyssey LFC™”, “Containment Amount” and “Audyssey DSX®” settings are stored for each input source.

0When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ® XT32”, “Dynamic EQ” and “Dynamic Volume” settings cannot be configured.

0This cannot be set when the input mode is set to “7.1CH IN”.

Front panel Display Rear panel

oMultEQ® XT32

MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. It is recommended that “Reference” is selected.

Reference	Selects the default calibrated setting with
	a slight roll off at high frequencies, which
(Default):
	is optimized for movies.
L/R Bypass:	Selects the reference setting, but
	bypasses MultEQ® XT32 on the front left
	and right speakers.
	Selects the calibrated setting which is
Flat:	optimized for small rooms where your
	listening position is closer to the
	speakers.
Off :	Turn “MultEQ® XT32” equalizer off.

When the headphones are used, “MultEQ® XT32” is automatically set to “Off”.

187 Remote Index