Contents

Connections

Playback

Settings

Tips

Appendix

oExperimenting with preset codes one by one for registration

1Switch the power on of the device for which you want to set the preset code.

2Press and hold down the input source select button that you want to register the preset code to and SET until “PRSET” indicator on the remote control display is flashing, then release.

3Aim the remote control at the appliance and slowly alternate between pressing CH/PAGE d and DEVICE X for the appliance.

The preset code is shown in the remote control display.

0Some manufacturers use more than one type of remote control code. Preset codes to change the number and verify correct operation.

0If the AV device is not a Marantz device, or if the device does not operate even when the preset code is registered, use the learning function. Remote codes for different devices can be remembered for use by the Marantz remote control included with this device. (v p. 339)

NOTE

Depending on the model and year of manufacture of your device, some buttons may not operate.

4

5

Stop when the appliance turns off. Press ENTER once to lock in the code.

Front panel

Display

Rear panel

268

Remote

Index

Page 268
Image 268
Marantz SR7009 owner manual Experimenting with preset codes one by one for registration