Marantz SR7009 ZONE2 Setup / ZONE3 Setup, o Lch Level, oBass, oTreble, oHigh Pass Filter, Display

The low range is not attenuated.

Contents Connections Playback SettingsTipsAppendix

	o Lch Level
ZONE2 Setup / ZONE3 Setup
Makes settings for audio playback with ZONE2 and ZONE3.	Adjust the left channel output level.
		-12 dB – +12 dB (Default : 0 dB)

Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale”. (v p. 186)

oBass

Adjust bass.

-10 dB – +10 dB (Default : 0 dB)

oTreble

Adjust treble.

-10 dB – +10 dB (Default : 0 dB)

oHigh Pass Filter

Make settings for cutting the low range to reduce distortion in the bass.

On: The low range is attenuated.

Off (Default):

oRch Level

Adjust the right channel output level. -12 dB – +12 dB (Default : 0 dB)

oChannel

Set whether to playback in stereo or monaural.

Stereo	Stereo playback.
(Default):
Mono:	Monaural playback.

oHDMI Audio (ZONE2 only)

Selects the audio signal format for playing an HDMI source in ZONE2.

Through The HDMI audio signal is passed through this unit to the (Default): device in ZONE2.

The HDMI audio signal input into this unit is converted to a PCM: PCM signal that can be output from the ZONE2 PRE OUT

terminals or speaker terminals.

Front panel Display Rear panel 256 Remote Index