Marantz SR7009 owner manual Bass, Subwoofer Mode, LPF for LFE, Lfe, LFE+Main

Contents Connections Playback Settings Tips Appendix

Bass

Set subwoofer and LFE signal range playback.

oSubwoofer Mode

Select low range signals to be reproduced by subwoofer.

LFE	The low range signal of the channel set to
	“Small” speaker size is added to the LFE
(Default):
	signal output from the subwoofer.
LFE+Main:	The low range signal of all channels is
	added to the LFE signal output from the
	subwoofer.

0“Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” in the menu is set to other than “None”. (v p. 236)

0Play music or a movie source and select the mode offering the strongest bass.

0If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected sound mode. Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.

(v p. 236)

oLPF for LFE

Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer.

80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz

(Default : 120 Hz)

Front panel Display Rear panel 243 Remote Index