USING YOUR RANGE
THE ELECTRONIC OVEN CONTROL
Indicator lights
(see below)
|
|
|
|
|
|
|
| TIMER | ON |
BAKE |
|
|
|
|
|
| |||
|
|
|
|
| |||||
BROIL |
|
|
|
| SELF - CLEANING OVEN | ||||
START ? |
|
|
| ||||||
HEAT |
| ||||||||
CLEAN |
|
|
| ||||||
|
| ||||||||
DOOR LOCKED |
|
Electronic display
|
|
|
|
|
|
|
| Start/enter pad | |
Bake pad |
|
| SELF |
| CLOCK | START | OFF | (p. 12) | |
BAKE | BROIL |
|
|
| |||||
CLEAN | TIME | TIMER | ENTER | CANCEL | Off/cancel pad | ||||
|
| ||||||||
(p. 13) |
|
|
|
|
|
| |||
|
|
|
| CANCEL | 5 SEC |
| (p. 12) | ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
| Broil pad | Self clean | Temperature/ | Clock/timer pads |
| ||||
| (p. 17) | pad |
| time pads | (pp. |
| |||
|
| (p. 23) |
| (pp. 11, 13, |
|
|
| ||
|
|
|
| 16, 18, 23) |
|
|
|
Display
•When you first plug in the range, “PF” will appear on the display until you press any command pad. If “PF” again appears on the display, your electricity was off for a while. You will need to reprogram any temperature adjustments you may have made. See the “Adjusting the oven tempera- ture control” section.
•When you are using the oven, the display will show preheat times and temperature settings.
•When you are not cleaning or cooking with the oven, the display will show the time of day.
•When setting a function, if you do not press the start/enter pad within 5 seconds, the Start? indicator light will flash. If you do not press the start/enter pad within 5 minutes, the function will be canceled.
Indicator lights
An indicator light to the left of the display lights up when you are in a setting. An indicator light on the display lights up when the oven is on.
Using the control lock
The control lock lets you disable the control panel command pads. The control lock comes in handy when you want to prevent others from using
the oven.
NOTES:
•You can only use the control lock when the oven is not in use or the control has not been set.
•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
•You must reset the control lock if the power goes out for more than 1 second.
To lock the control panel:
Press and hold the start/enter pad for 5 seconds. You will hear a single tone and “Loc” will
START appear on the temperature display for
ENTER | 5 seconds. “Loc” and “START?” will | |
then appear whenever a command pad | ||
5 SEC | ||
is pressed. | ||
|
To unlock the control panel:
Press and hold the start/enter pad for 5 seconds. You will hear a single tone and “Loc” and
START “START?” will disappear from the tempera-
ENTER | ture display. |
| |
5 SEC |
|
10