Whirlpool W10162205A manual Lift-up Cooktop, Home Canning, Cookware, To Replace, To Lift

Page 10

2.Pull the coil element straight away from the receptacle.

3.Lift out the burner bowl.

To Replace:

1.Line up openings in the burner bowl with the coil element receptacle.

2.Holding the coil element as level as possible, slowly push the coil element terminal into the receptacle.

3.When the terminal is pushed into the receptacle as far as it will go, push down the edge of the coil element opposite the receptacle.

Lift-up Cooktop

(on some models)

The lift-up cooktop provides easy access for cleaning beneath. Do not drop the cooktop. Damage could occur to the finish and the cooktop frame. For more information, see the “General Cleaning” section.

To Lift:

Lift the cooktop by both front corners until the supports lock into place.

To Replace:

1.Lift the cooktop from both sides while pressing the support rods back to unlock them.

2.Slowly lower the cooktop into place.

Home Canning

When canning for long periods, alternate the use of surface cooking areas, elements or surface burners between batches. This allows time for the most recently used areas to cool.

Center the canner on the grate or largest surface cooking area or element. On electric cooktops, canners should not extend more than ½" (1.3 cm) beyond the surface cooking area or element.

Do not place canner on 2 surface cooking areas, elements or surface burners at the same time.

On ceramic glass models, use only flat-bottomed canners.

On coil element models, the installation of a Canning Unit Kit is recommended. If a kit is not installed, the life of the coil element will be shortened. See “Assistance or Service” for instructions on how to order.

For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-fitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

Use the following chart as a guide for cookware material characteristics.

COOKWARE

CHARACTERISTICS

 

 

Aluminum

Heats quickly and evenly.

 

Suitable for all types of cooking.

 

Medium or heavy thickness is best for

 

 

most cooking tasks.

 

 

Cast iron

Heats slowly and evenly.

 

Good for browning and frying.

 

Maintains heat for slow cooking.

 

 

 

Ceramic or

Follow manufacturer’s instructions.

Ceramic glass

Heats slowly, but unevenly.

 

 

Ideal results on low to medium heat

 

 

settings.

 

 

Copper

Heats very quickly and evenly.

 

 

 

Earthenware

Follow manufacturer’s instructions.

 

Use on low heat settings.

 

 

Porcelain

See stainless steel or cast iron.

enamel-on-

 

 

steel or cast

 

 

iron

 

 

 

 

Stainless steel

Heats quickly, but unevenly.

 

A core or base of aluminum or copper

on stainless steel provides even heating.

10

Image 10
Contents Electric Range W10162205ATable of Contents Range Safety Anti-Tip BracketImportant Safety Instructions Control Panels Parts and FeaturesStyle Abcd EFG Range Abcd EFDual Cooking Zone Cooktop USECooktop Controls Warm Zone ElementCoil Elements and Burner Bowls Hot Surface Indicator LightCeramic Glass To UseCookware Lift-up CooktopHome Canning To ReplaceStyle 1 Electronic Oven Control on some models Electronic Oven ControlsStyle 2 Electronic Oven Control on some models Style 3 Electronic Oven Controls on some models BCD EStart Off/CancelDisplay ClockFahrenheit and Celsius TimerTones Control LockHour Shut-Off Oven Temperature ControlOven USE Aluminum FoilMeat Thermometer Split Oven RackBakeware BakewareBaking and Roasting Oven VentChoice Bake Function Convection Cooking Broiling ChartBroiling To BroilStyle 3 Convection Baking and Roasting To Select Convection SettingsStyle 1 Convection Baking and Roasting On some modelsFood Temp Hold Warm FeatureStyle 1 Electronic Oven Control To Use FOOD/RACK Cook Time Oven Temp Internal PositionTimed Cooking Style 3 Electronic Oven Control To Set a Timed Cook Sequence ProgrammingStyle 2 Electronic Oven Control To Set a Timed Cook To Program the First Step of the SequenceTo Review/Modify Programmed Sequence Warming DrawerTo Program Steps 2, 3 and 4 of the Sequence To Modify Sequence ProgrammingSelf-Cleaning Cycle on some models Range CareStyle 3 Electronic Oven Control on some models General CleaningStyle 2 Electronic Oven Control on some models Style 4 Electronic Oven Control on some modelsCooktop Controls Stainless Steel on some modelsControl Panel Oven Cavity Oven Door ExteriorOven Racks and Roasting Racks Oven Door Oven LightAppliance Outlets Appliance Outlet Circuit BreakersNothing will operate TroubleshootingStorage Drawer Cooktop will not operateOven indicator lights flash Hot Surface indicator light stays onOven temperature too high or too low Self-Cleaning cycle will not operateAssistance or Service This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesSécurité DE LA Cuisinière La bride antibasculementConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Tableaux de commande Pièces ET CaractéristiquesBouton de commande arrière droit Cuisinière IllustréesZone de cuisson à double fonction Commandes de la table de cuissonUtilisation DE LA Table DE Cuisson Utilisation de lélément DoubleVitrocéramique Élément zone de réchauffageUtilisation Témoin lumineux de surface chaude RéinstallationÉléments en spirale et cuvettes de brûleur EnlèvementPréparation de conserves à la maison Pour réinstallerTable de cuisson relevable Ustensiles de cuissonStyle 1 Commande électronique du four sur certains modèles Commandes Électroniques DU FourStyle 2 Commande électronique du four sur certains modèles Style 3 Commandes électroniques du four sur certains modèles Arrêt/annulation AffichageMise en marche HorlogeFahrenheit et Celsius Lampes de la cuisinièreSignaux sonores MinuterieStyles 1, 2, 3 et 4 Commandes électroniques du four Verrouillage des commandesCommande de la température du four Arrêt au bout de 12 heuresDe cuisson Utilisation DU FourPapier d’aluminium Grille de four en deux piècesCuisson au four et rôtissage Thermomètre à viandeÉvent du four Système de gestion de la température AccubakeCuisson au gril Préchauffage Style 1 Commande électronique du fourFonction Choice Bake Cuisson au grilStyle 1 Cuisson au four et rôtissage par convection Cuisson par convectionTableau DE Cuisson AU Gril Pour sélectionner les réglages de convectionCertains modèles DESStyle 3 Commande électronique du four Utilisation Style 1 Commande électronique du four UtilisationStyle 2 Commande électronique du four Utilisation Caractéristique Hold WarmRéglage dune cuisson minutée différée Pour programmer les étapes 2, 3 et 4 de la séquence Programmation de séquencesProgrammation de la première étape de la séquence Révision/modification de la séquence programméeProgramme dautonettoyage Entretien DE LA CuisinièreTiroir-réchaud Modification de la programmation dune séquenceSur certains modèles Style 3 Commande électronique du fourComment fonctionne le programme AutonettoyageNettoyage général Style 4 Commande électronique du fourSurfaces Externes EN Émail Vitrifié Surface Sous LA Table DE Cuisson Boutons DE Commande DE LA Table DE CuissonTableau DE Commande Extérieur DE LA Porte DU FourPrises pour appareils ménagers Lampe du fourPorte du four Tiroir de remisage Dépannage Si vous avez besoin de pièces de rechange Assistance OU ServiceListe daccessoires Pour plus d’assistanceGarantie DES Gros Appareils Ménagers Whirlpool Corporation

W10162205A specifications

The Whirlpool W10162205A is a highly regarded replacement part specifically designed for use in refrigerators, showcasing the brand's commitment to quality and innovation. This component is an ice maker kit that enhances the functionality and efficiency of various compatible refrigerator models.

One of the main features of the W10162205A is its easy installation process. It comes with all the necessary components and instructions for a straightforward DIY replacement, allowing homeowners to address ice-making issues without the need to call a professional. This accessibility is particularly appealing to those who value convenience and cost-effectiveness.

The Ice Maker Kit is built with advanced technologies to ensure reliable performance. It is designed to produce fresh ice automatically, significantly improving user experience. With the ability to generate a substantial quantity of ice, the W10162205A is perfect for households that frequently entertain guests or enjoy cold beverages. Its efficiency not only contributes to a consistent supply of ice but also helps in reducing energy consumption, aligning with modern sustainability standards.

In terms of characteristics, the W10162205A boasts durable construction, which is crucial for longevity. The materials used in this ice maker are resistant to wear and tear, ensuring that it can withstand the rigors of everyday use. Moreover, its compatibility with various Whirlpool refrigerator models reflects the brand's commitment to versatility in their product offerings.

The Whirlpool W10162205A also comes equipped with user-friendly features. It typically includes a built-in ice level sensor that stops the production when the bin is full, preventing overflow and ice jams. This smart functionality not only saves energy but also ensures that users have an efficient and hassle-free experience with their kitchen appliances.

Overall, the Whirlpool W10162205A ice maker kit is an essential component for enhancing refrigerator performance. With its blend of practicality, durability, and advanced technology, it serves as an excellent investment for any homeowner looking to improve their appliance's ice-making capabilities. The attention to detail in design and function underscores Whirlpool's reputation as a leader in household appliances.