TROUBLESHOOTING
WHEN SELF-CLEANING YOUR OVEN
| PROBLEM | CAUSE | |
|
|
|
|
| The | •You did not press the start/enter pad. | |
| will not work | •The door is not closed all the way. | |
|
| ||
|
|
|
|
COOKING RESULTS
| PROBLEM | CAUSE | |
|
|
|
|
| Cooking results are | •The oven temperature seems too low or too high. See “Adjusting the oven | |
| not what you expected | temperature control” on page 17 to adjust the oven temperature. | |
|
| •You did not preheat the oven before baking (if called for in the recipe). | |
|
| •You are using a pan that is not the correct type or size. Refer to a reliable | |
|
| cookbook or recipe for the recommended pan type and size. | |
|
| •There is not enough air space around the pan when baking. Allow 11/2 to | |
|
| 2 inches of air space on all sides of the pan. | |
|
| •The flame size does not fit the cookware being used. | |
|
| •When broiling, you have not completely closed the oven door. | |
|
| •The flow of combustion and/or ventilation air to the range is blocked. Make | |
|
| sure nothing is blocking the middle front of the backguard. | |
|
| •The range is not level. (See the Installation Instructions.) | |
|
|
|
|
DISPLAY MESSAGES
PROBLEM | CAUSE |
|
|
The display is showing | •There has been a power failure. Press the off/cancel pad to clear the |
“PF” | display. |
|
|
“F” followed by a number | •Press the off/cancel pad to clear the display. If an “F” code appears again, |
shows on the display | call for service. (See “If You Need Assistance or Service” on page 34.) |
|
|
The indicator light(s) | •The function(s) indicated may not be working. Refer to the section in this |
is flashing | Use and Care Guide discussing the function. If the indicator light(s) keeps |
| flashing, call for service. (See “If You Need Assistance or Service” on |
| page 34.) |
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 34.
33