Whirlpool RF356BXD warranty Anti-tip bracket, Optional door panel pat, Floor bracket

Page 21

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the anti-tip bracket properly secured.

Tip Over Hazard

Connect anti-tip bracket to the range feet.

Reconnect anti-tip bracket, if the range is moved.

Do not push down on the open oven door.

Follow the Installation Instructions.

Do not let children climb onto the oven door.

Failure to do so can result in death, burns, or other injury.

To verify the anti-tip bracket

is engaged (if you have a floor bracket):

l Remove the lower panel. (See page 20.)

Rear leveling leg

Floor bracket

l Look to see if the anti-tip bracket is attached to floor with screws.

l Make sure one rear leveling leg is posi- tioned under the anti-tip bracket.

l See Installation Instructions for further details.

To verify the anti-tip bracket is engaged (if you have a wall bracket):

Cable

(attached to rear of control panel)

Wall bracket

l Look to see if the anti-tip bracket is attached with screws to the wall behind the control panel.

lMake sure the cable on the back of the range is secured by the two hooks on the bracket.

l Cable must be unhooked from wall bracket to move range for cleaning or service. Reconnect cable before using range.

l See Installation Instructions for further details.

Optional door panel pat

If you would like to change the color of your oven door glass to white or almond, you can order one of these kits from your Whirlpool Dealer. The kits include easy installation instructions.

l

l

White (Kit No. 814324) Almond (Kit No. 814325)

21

Image 21

Contents UseAndCare Table of Contents Please record your model’s information Thank you for buying a WHIRLPOOL@ applianceYour safety is important to us Range SafetyOn next Instructions Control Panel Getting to Know Your RangeUsing the surface units Using Your RangeSurface unit indicator lights Hot surface indicator lightsCookware tips Using the ceramic glass cooktopPositioning racks Rack placement for specific foodsPans Home canning informationFor best air circulation Using aluminum foil for bakingTwo pans Three or four pansUsing the Minute Timer Setting the clockPosition racks Baking/roastingPut food in oven After cooking, turn off ovenAdjusting the oven temperature control When broiling is done, turn off oven BroilingPosition rack Broiling rack position chart To custom broil at a lower temperatureRack Position Type of Food From BOlTOM DonenessEnergy saving tips Broiling tipsUsing the Mealtimertm clock Page Lower panel Oven ventRemoving the lower panel Slightly swlng out and lift panel to remove from top clipsAnti-tip bracket Optional door panel patFloor bracket Before you start Using the Setf-Cleaning CycleSetting the controls Move the Lock Lever to Right-the Clean positionUse 3 hours or more for moderate to heavy soil On next Do not Force the Lock Lever. Wait until it moves easily How the cycle works Special tipsCaring for Your Range Cleaning the cooktopIf There are What to do Cleaning tipsCleaning other range parts HOW to CleanPart What to USE Other possible problems and their causes TroubleshootingProblemcause If nothing operates, check the followingSelf-Cleaning cycle Problem CauseWill not operate What you expectedIf you need service Requesting Assistance or ServiceIf you need FSP@ Replacement parts If you are not satisfied with how the problem was solvedTopic IndexWarranty Cleantop Freestanding Range WarrantyLength of WARRANti Whirlpool will PAY for Full ONE-YEAR