Whirlpool FGS337G warranty Setting the Controls, Using Your Range

SETTING THE CONTROLS

USING YOUR RANGE

1.Set the oven control knob to CLEAN.

The door will lock itself within 6 seconds. If the door has a problem locking, it will try to lock itself for 1 minute. If the door fails to lock, the Self- Cleaning cycle will cancel. An error code will be displayed.

NOTE: Do not attempt to open the door while in the locking mode.

PUSH AND TURN

				E		AN
			CL
							B
								R
								OI
	F							L
F									0
								5
O									0
									4
M
R									5
A									0
W									4
	0							0	0
	0
	2
	0							3
							5
	5						0
		2		0	03

YOU SEE

OVEN ON light goes on. DOOR LOCKED/ CLEANING light flashes until you close door, then is solid. HEATING light goes on when oven starts heating.

2. Set the cleaning time (optional).	PRESS
Press the “up” (s) or “down” (t) pad(s) to select
a clean time between 2 hours, 30 minutes and 4
hours, 30 minutes.
NOTE: The Self-Cleaning cycle will automatically
set a 31⁄2 hour cycle unless a different time is
selected.
3. During the last 30 minutes of the Self-Cleaning
cycle the oven will start to cool down.
Once the oven goes below the locked
temperature:

4. Turn the oven control knob to OFF. TURN

					FF
				O
			M
			R
			A					L
			W
		0					C
2	0							E
								A
0								N
5								B
2
								R
0								O
0								I
3								L
			0					5
							0
			5				0
			3				4
					004	5
						0

5.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

YOU SEE

OVEN ON and DOOR LOCKED/CLEANING lights are on. HEATING light goes off and COOL appears in display.

YOU SEE

OVEN ON light flashes.

DOOR LOCKED/ CLEANING light goes out when door unlocks.

YOU SEE

OVEN ON light goes out and time of day appears in display.

continued on next page

19