Whirlpool FGS337G warranty Using Your Range, Using the Surface Burners, Burner heat settings

USING YOUR RANGE

USING THE SURFACE BURNERS

wWARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Burner heat settings

Use the following chart as a guide.

SETTING	RECOMMENDED USE
LIGHT	• To light the burner.
HIGH	• To start food cooking.
	• To bring liquid to a boil.
Mid-range	• To hold a boil.
(between HIGH	• To fry chicken or pancakes.
and LOW)	• For gravy, pudding, and icing.
	• To cook large amounts of
	vegetables.
LOW	• To keep food warm.
	• To melt chocolate or butter.
	• To simmer.

Using the control knobs

Your range comes with electric ignitors. Electric ignitors automatically light the burners each time you turn the control knobs to LIGHT.

•Place a filled pan on the burner grate before turning on the surface burner. Do not operate a burner for extended periods of time without having cookware on the grate.

•Push in the control knob and turn it counter- clockwise to the LIGHT position. The

clicking sound is the ignitor sparking. Make sure the burner has lit.

• To stop the clicking sound after the burner lights, turn the control

knob to the cook setting you want. You can set the control knob any-

where between HIGH and LOW.

NOTE: All four electric ignitors will click at the same time. However, the burner with the control knob turned to LIGHT is the one that will ignite.

NOTE: Do not leave empty cookware, or cookware which has boiled dry, on a hot surface burner. The cookware could overheat, causing damage to the cookware or cooking product.

Easy ways to save energy

•To help shorten your cooking time, use the least amount of liquid possible.

•Preheat your pots and pans only when recommended and for the shortest time possible.

•Start your food on a higher heat setting, then turn the control to a lower setting to finish cooking.

6