HTC HS S00 user manual Change Video Call settings, To make a video call, Swap Image options

72 Using Phone Features

3.4 Making a Video Call

Your device allows you to make video calls when you are within a 3G network coverage area. You need to use a 3G enable SIM card to make video calls.

To make a video call

•On the Phone keypad, tap the phone number to call, then tap .

•On the Phone keypad, tap the phone number to call, then tap Menu > Video Call to start a video call.

•From Contacts, tap and hold the desired contact, and tap Video Call.

•From Call History, tap and hold the desired phone number or contact, and tap Video Call.

Note The other party’s image will appear on the screen about 3 to 5 seconds after a connection is established, depending on the signal strength. The streaming images quality may also be influenced by the signal.

When the video call is unsuccessful, a message pops up asking you if you want to try again, make a voice call instead, or send an SMS/MMS message.

Change Video Call settings

While on a video call, you can change certain settings such as the size of the image, brightness of the image, the camera to use, and more.

The following shows the Video Call screen and control buttons during an ongoing call.

1

2

3

4 5 6

Swap Image options

Both parties (My video small)

Both parties (My video large)

Both parties (equal) Other party only

Using Phone Features 73

1Status area. Displays your service provider name, the other party's information, and call timer.

2Image display area. Displays your image and the other party's image, depending on the selected Swap Image setting.

3Camera On/Off. Tap to toggle between turning on/off the camera. When the camera is turned off, the image displayed depends on the Video Call options you have set. See “Set up Video Call Options” for details.

4Audio Mute/Unmute. Tap to mute/ unmute audio.

5Main/Second camera. Tap to toggle between using the Main (back) and Second (front) camera.

6Swap Image. Tap continuously to cycle through the available image display options.

The other party's image is large while your image is small. This is the default setting.

The other party's image is small while your image is large.

Both your image and the other party appear the same size.

Only the other party's image is displayed.