HTC HS S00 Starting Up, Turn your device on and off, Auto configure the data connection settings

22 Getting Started

To install the battery

Install the battery by inserting it with its exposed copper part aligned with the protruding copper conductor on the lower-right side of the battery compartment.

Insert the bottom side of the battery first, then gently push the battery into place.

To replace the back cover

1.Secure the top part of the back cover by ‘locking’ it into the 3 openings on the device.

2.Press the middle portion of the back cover.

3.Press the bottom part of the back cover to lock it into place. You should hear a click.

To install the microSD™ card

1.Pry open the rubber cover at the bottom-left side of the device.

2.Insert the microSD card with the gold contacts facing up.

3.Close the rubber cover.

Tip Press the microSD card to pop it out of the slot.

Copper conductor

2

3

Getting Started 23

1.3 Starting Up

After inserting your USIM/SIM card and battery, you can now power on and start using your device.

Turn your device on and off

To turn on the power

Press and hold the POWER button for a few seconds.

When you turn on your device for the first time, a Quick Start Wizard will guide you through the calibration process and the setup of regional settings, date and time, and password. For more information about touch screen calibration, see “Calibrate the device”.

To turn off the power

Press and hold the POWER button for a few seconds.

A message will then be displayed, prompting you whether or not to turn off the device completely.

Auto configure the data connection settings

The first time you power on your device, you will see a notification message from the Connection Setup on the Today screen.

The Connection Setup can automatically configure your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device.