HTC HS S00 user manual To open Comm Manager, To automatically detect the network operator

150Getting Connected

10.1Comm Manager

Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily.

Getting Connected 151

10.2 Connection Setup

Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network

To open Comm Manager

Tap Start > Programs > Comm Manager.

1

2

3

4

5

Off/Disabled On/Enabled

operator, then Connection Setup does all the configuration for you.

To automatically detect the network operator

The first time you power on your device, or when you insert a new SIM card and then power on your device, Connection Setup will display a notification message to inform you that it will automatically configure your device.

1Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the phone and Bluetooth functions. For more information, see "Airplane Mode" in Chapter 3.

2Tap to switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone settings. See Chapter 4 for details.

3Tap to switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your device. See "Bluetooth" in this chapter for details.

4Tap to switch between automatically receiving (as items arrive) or manually retrieving Outlook e-mails. See Chapter 8 for details.

5Tap to disconnect active data connections (e.g. 3G). You cannot reconnect a data connection in Comm Manager.

1.Tap Yes on the notification message.

Note If your SIM card supports multiple network operator profiles, the next message that appears will display network profile choices. Select the profile you want to use and tap OK.

2.Next, you will be asked if you want to automatically confgure your device to the proper network settings. Tap Yes.

Connection Setup then confgures your device’s data connection settings.

3.After the Connection Setup completes the confguration, tap Restart.

To manually select the network operator

You can also manually select your network operator from Connection Setup’s settings screen. Connection Setup will then reconfigure your device’s data connections settings based on the operator that you selected.

1.Tap Start > Settings > Connections tab> Connection Setup.

2.Select the network Country and Operator you want to use.