HTC HS S00 user manual To add a new GPRS/3G connection, Tap Finish

152 Getting Connected

Note If you choose a Country and/or Operator that is different from the installed SIM card network operator, you may not be able to access network services.

3.Tap OK.

4.The next message that appears prompts you to confrm whether you want to confgure the data connection settings based on the selected network. Tap Yes.

Connection Setup then confgures the data connection settings.

5.After the Connection Setup completes the confguration, tap Restart.

10.3Ways of Connecting to the Internet

Your device’s networking capabilities allow you to access the Internet or your corporate network at work through wireless and conventional connections. You can connect to the Internet through one of the following connections:

•GPRS, EDGE or 3G

•Dial-up

Note You can also add and set up the following connections:

•VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.

•Proxy: A Proxy connection is used to access the Internet using an existing connection to your corporate or WAP network.

10.4GPRS/3G

Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates.

GPRS/3G settings are already preconfigured on your device, and your device is ready to use your wireless service provider’s GPRS/3G services. Do not change the settings as this may cause services to stop working.

Getting Connected 153

To add a new GPRS/3G connection

In times when you need to add another GPRS/3G connection on your device, obtain the Access point name from your wireless service provider. Also, check if a user name and password are required.

1.Tap Start > Settings > Connections tab > Connections.

2.Under My ISP, tap Add a new modem connection.

3.On the Make New Connection screen, enter a name for the connection.

4.In the Select a modem list, select Cellular Line (GPRS , 3G), then tap Next.

5.Enter the Access point name, then tap Next.

6.Enter the user name and password, only if required.

7.Tap Finish.

Notes • To view help information for any screen, tap the help icon ( ).

•To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard.