20 Getting Started

1.2Installing the USIM/SIM Card, Battery, and Storage Card

Always turn off your device before installing or removing the USIM/SIM card or battery.

The USIM/SIM card contains your phone number, service details, and phonebook/message memory. Your device supports both 1.8V and 3V SIM cards. Some legacy SIM cards will not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service.

Your device contains a rechargeable Li-ion battery. It is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to connecting ports, and your voice, data, and other program usage patterns.

Battery life estimates (approximations):

Standby time: Up to 180 hours for GSM Up to 250 hours for UMTS

(Subject to network and phone usage)

Talk time: Up to 5 hours for GSM.

Up to 3 hours for UMTS.

(Subject to network and phone usage)

Media playback time: Up to 4.95 hours for WMV; Up to 6 hours for WMA.

Warning! To reduce risk of fire or burns:

Do not attempt to open, disassemble, or service the battery pack.

Do not crush, puncture, short external contacts, or dispose of in fire or water.

Do not expose to temperatures above 60oC (140oF).

Replace only with the battery pack designated for this product.

Recycle or dispose of used battery as stipulated by local regulations.

Getting Started 21

To remove the back cover

Before installing the USIM/SIM card or battery, you have to remove the back cover.

1.Make sure your device is turned off.

2.Hold the device securely with the front facing down.

3.With your thumb or fnger, lift up the bottom of the back cover.

Lift from here

To install the USIM/SIM card

1.Pull back the red rubber door near the SIM card slot to allow you to insert the USIM/SIM card.

2.Insert the USIM/SIM card with the gold contacts facing down and the cut corner on the outside.

Note You can check the SIM card drawing on the SIM card slot to see how to insert the USIM/SIM card.

3.Secure the USIM/SIM card in place by closing the red rubber door.

Cut corner of SIM card

Red rubber door

Page 12
Image 12
HTC HS S00 Installing the USIM/SIM Card, Battery, and Storage Card, To remove the back cover, To install the USIM/SIM card