HTC HS S00 user manual Charge the battery, Calibrate the device, Manage screen settings

24 Getting Started

To automatically configure data connection settings

1.When you see the notifcation message from the Connection Setup, tap Yes.

Notes • If you do not see the notification message, tap	on the title bar to
display the message.

•If your USIM/SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK.

2.Connection Setup then starts to confgure your device’s data connection settings.

3.After the Connection Setup completes the confguration, tap Restart.

For more information about the Connection Setup, see Chapter 10.

Charge the battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that you charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways:

•Charging the device’s battery by connecting the power adapter.

•Connecting your device to a PC via the provided USB Sync cable.

Note Only the AC adapter and USB cable provided with your device should be used to charge the device.

Charging is indicated by a solid amber light on the right LED indicator. As the battery is being charged while the device’s power is on, a charging icon ( ) will be shown on the title bar of the Today screen. After the battery has been fully charged, the right LED becomes green and a full

battery icon ( ) appears on the Today screen’s title bar.

Warning!	• Do not remove the battery from the device while you are charging it
	using the AC or car adapter.
	• As a safety precaution, the battery stops charging when it overheats.

Getting Started 25

Calibrate the device

Calibrating the touch screen involves tapping the center of a cross with the stylus as the cross moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.

If your device does not accurately respond to screen taps, follow these steps to re-calibrate it:

1.Tap Start > Settings > System tab > Screen.

2.On the General tab, tap Align Screen, then follow the onscreen instructions to complete the calibration.

Manage screen settings

The device’s display has the following orientation modes: Portrait and Landscape. To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want.

Tip To quickly change the screen orientation, you can also tap the Rotate Screen icon in HTC Home’s Launcher. See “HTC Home” later in this chapter for details.

To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType check box.

To increase the readability or to see more content on the screen, on the Text Size tab, adjust the text size by moving the slider.

Switch your device to Sleep mode

Quickly pressing the POWER button turns off the display temporarily and switches your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power.

Your device also automatically goes into Sleep mode when you leave the device idle after a certain amount of time.

To specify the timeout period before your device goes into Sleep mode

1.Tap Start > Settings > System tab > Power > Advanced tab.

2.Under On battery power, make sure the Turn off device if not used for check box is selected.

3.Select the battery timeout period, then tap OK.