USING YOUR RANGE
TONES
Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all tones except for the
Press and hold STOP TIME for 5 seconds.
A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see “oFF” for 3 seconds when the tones are turned off and “on” for 3 seconds when they are turned on.
To choose between high and low volume tones:
Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Either “HI” or “LO” will appear on the time display for 3 seconds to show the volume you chose.
BAKING/ROASTING
Your oven is designed with the ACCUBAKE® temperature management system to constantly monitor oven temperature. The bake element will cycle, as needed, to maintain the desired tem- perature. This feature is automatically
activated when the oven is in operation.
1. Place the racks where you need them in the oven.
For more information, see “Positioning racks” under “Using the oven” earlier in this section.
Rear of rack
2. Choose the bake setting (optional). | PRESS | YOU SEE |
| ||
| BAKE | F |
|
| |
|
| BAKE |
3.Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press ▲ to raise the temperature or ▼ to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
YOU SEE
F
BAKE
(example for bake at 375°F)
18