TROUBLESHOOTING
COOKING RESULTS
PROBLEM | SOLUTION |
Cookware not level | • Level the range. (See the Installation Instructions.) |
on cooktop | • Insert coil correctly. |
(Check to see if liquids | • Use cookware with a flat bottom. |
are level in cookware) |
|
Excessive heat on cooktop | • Choose cookware the same size or slightly larger than the element. |
in areas around cookware |
|
|
|
The oven temperature | • Adjust the oven temperature control. (See “Adjusting the oven temperature |
seems too low or too high | control” section.) |
|
|
Slow baking or roasting | • Increase baking or roasting time. |
| • Increase temperature 25°F. |
| • Preheat oven to selected temperature before placing food in when |
| preheating is recommended. |
| • Choose bakeware that will allow 2 inches of air space around all sides. |
| • Open oven door to check food when timer signals shortest time suggested |
| in recipe. |
| • Oven peeking can make cooking times longer. |
Baked items too brown on bottom
•Preheat oven to selected temperature before placing food in oven.
•Choose bakeware that will allow 2 inches of air space around all sides.
•Position rack higher in oven.
•Decrease oven temperature 15°to 25°F.
Unevenly baked items | • Level the range. |
| • Bake in center of oven with 2 inches of space around each pan. |
| • Check to make sure batter is level in pan. |
Crust edge browns | • Shield edge with foil. |
before pie is done |
|
DISPLAY MESSAGES
| PROBLEM | CAUSE | |
|
|
|
|
| The display is showing | •There has been a power failure. Press OFF/CANCEL to clear the display, | |
| “PF” | then reset the clock. (See page 15.) |
|
| “F” followed by a | •Press OFF/CANCEL to clear the display. If an “F” code appears again, call | |
| number shows on | for service. (See “If You Need Assistance or Service” on page 44.) | |
| the display |
|
|
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 44.
43