Electronic Oven Control, Display/clock | Whirlpool GR399LXG manual

5 SEC

USING YOUR RANGE

THE ELECTRONIC OVEN CONTROL

	Electronic				Minute timer set and
	Electronic				off pads (pp. 16, 17)
	display				off pads (pp. 16, 17)				Clock pad
	display

									(p. 16)
			C						Manual oven
			F		TIMER	TIMER	CLOCK	LIGHT	light pad
	HEAT			TIMER STOP	SET	OFF	CLOCK	LIGHT	light pad
	HEAT		ON	TIMER STOP					(p. 41)
SELF-CLEANING OVEN	DELAY	BAKE	ON	LOCKED CLEAN
SELF-CLEANING OVEN	TIMED	BROIL	START?	COOK TIME

BAKE

CUSTOM	AUTO
BROIL	CLEAN

TEMP COOK TIME

DELAY START TIME

STOP	HR	MIN	START	OFF
TIME	HR	MIN	ENTER	CANCEL
TIME			ENTER	CANCEL
			5 SEC

Oven selector	Temperature	Electronic	Hour	Minute	Start/enter	Off/cancel
pads	pad	MEALTIMER™	pad	pad	pad	pad
(pp. 18, 23, 31)	(pp. 18, 21, 23)	control pad	(p. 16)	(p. 16)	(p. 17)	(p. 17)
		(pp. 25-28)

Display/clock

•When you first plug in the range, everything on the display will light up for 1 to 2 seconds, then a time of day and “PF” will appear on the temperature display. Press OFF/CANCEL to clear “PF” from the display. If, after you set the clock (see the “Setting the clock” section), “PF” again appears on the display, your electricity was off for a while. Reset the clock, if needed.

•When you are not using the oven, the control is an accurate clock.

•When you are using the oven or minute timer, the display will show times, temperature settings, and what command pads have been pressed.

•When showing the time of day, the display will show the hour and minutes.

•When you are using the minute timer, the display will show minutes and seconds in the following sequence:

–For settings from 1-59 minutes, the display will count down each second.

–For settings one hour or over, the display will count down each minute.

•When you are using COOK TIME and/or STOP TIME, the display will show

hours and minutes or minutes

COOK STOP and seconds.

TIME TIME

Using the control lock

The control lock lets you shut down the control panel command pads. The control lock comes in handy when you want to prevent others from using

the oven.

NOTES:

•You can only use the control lock when the oven is not in use or the control has not been set.

•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.

•The control lock will stay on even after a power failure.

To lock the control panel:

Press and hold START/ENTER for 5 seconds.

You will hear a single tone and “Loc” and

START will appear on the temperature display. When the control is locked, “START?”

ENTER

will appear on the display and 3 tones will sound if you press any command

pad other than clock or timer set.

To unlock the control panel:

Press and hold START/ENTER for 5 seconds. You will hear 3 tones followed by a single tone.

START “Loc” and will disappear from the temperature display.